PIC18LF2610-I/SP
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 40MHz |
| Base Part Number | PIC18LF2610 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 25 |
| RAM Size | 3.8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 64KB 32K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 10x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 4 |
| ROM (words) | 32768 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Height Seated (Max) | 5.08mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18LF2610-I/SP Overview
For space savings, it is available in the 28-DIP (0.300, 7.62mm) package. Through Hole is used for mounting. Tube is the package that contains it. With a processor of PIC cores, the device is powered. It is important to keep the temperature at -40°C~85°C TA while working. Memory type FLASH is used for program memory. There are 25 I/Os on the board. To find equivalent components, use its PIC18LF2610 base part number. A DUAL position is assigned to its terminals. This circuit consists of 28 terminationals. PIC? 18F is the series number of this electrical component. By using a 5V voltage supply, high efficiency is possible. uPs/uCs/Peripheral IC for this gadget is MICROCONTROLLER. A total of 28 pins are required to construct this device. As a result, it is mounted in accordance with Through Hole. Total number of pins is 28. In Microcontrollers, this component is included. Using the devices' 64kB memory size, you can store programs and data. A 2/5.5V source is used for powering it. When working at a frequency of 40MHz it is able to achieve excellent efficiency. 4 timer/counters are present. It is a member of the PIC family of CPUs. Using a Internal oscillator type, it works well.
PIC18LF2610-I/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC18LF2610-I/SP Applications
There are a lot of Microchip Technology PIC18LF2610-I/SP Microcontroller applications.
- Vacuum cleaners
- 3D printers
- Telephone sets
- Air fryers
- Graphic terminals
- Fax machines
- Projectors
- Toasters
- Electrocardiogram (EKG)
- Copiers