PIC18F26K20-E/SS
| Parameters | |
|---|---|
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Series | PIC® XLP™ 18K |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Termination | SMD/SMT |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Frequency | 64MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18F26K20 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 3.5V |
| Interface | I2C, SPI, Serial, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 24 |
| RAM Size | 3.8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 64KB 32K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 11x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 4 |
| Density | 512 kb |
| EEPROM Size | 1K x 8 |
| CPU Family | PIC |
| Number of A/D Converters | 1 |
| Number of Programmable I/O | 25 |
| Number of ADC Channels | 11 |
| Number of PWM Channels | 2 |
| Height | 1.85mm |
| Length | 10.5mm |
| Width | 5.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 9 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
PIC18F26K20-E/SS Overview
For space savings, it is available in the 28-SSOP (0.209, 5.30mm Width) package. A Surface Mount mounting method is used. It comes in a Tube package. The device runs in PIC core processor. Work should be done at -40°C~125°C TA. There is FLASH program memory in it. 24 I/Os have been provided by the device. A comparable component can be found by using the base part number PIC18F26K20. The terminals of this device are set to DUAL. This circuit consists of 28 terminationals. It is a member of the PIC? XLP? 18K series of electrical components. The supply voltage of 3V allows for high efficiency. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER in order to monitor their performance. There are 28 pins used in the construction of this device. As a result, it is mounted in accordance with Surface Mount. Total number of pins is 28. The component is included in Microcontrollers. In the device, there is a memory capacity of 64kB which may be used to store programs and data. It is highly efficient when it works at a frequency of 64MHz. There are currently 4 timers/counters set up on the system. It is one of the members of the CPU family PIC. A chip with 25 programmable inputs/outputs is available. An oscillator of type Internal is used.
PIC18F26K20-E/SS Features
28-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18F26K20-E/SS Applications
There are a lot of Microchip Technology PIC18F26K20-E/SS Microcontroller applications.
- Robots
- Paper shredders
- Refrigerators
- DCS control intelligent sensor
- Hard drives
- Mobile computers
- Robotic prosthetic limbs
- Process control devices
- Projector
- Oil and gas