PIC18F25J10-I/SS
| Parameters | |
|---|---|
| Series | PIC® 18J |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Termination | SMD/SMT |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18F25J10 |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 21 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.7V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 32KB 16K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 10x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 3 |
| Density | 256 kb |
| On Chip Program ROM Width | 16 |
| Number of ADC Channels | 10 |
| Number of PWM Channels | 2 |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 9 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
PIC18F25J10-I/SS Overview
For space savings, it is available in the 28-SSOP (0.209, 5.30mm Width) package. A Surface Mount mounting method is used. A package of Tube contains it. A core processor of PIC is present in the device. Maintain a temperature of -40°C~85°C TA while working. In terms of its program memory type, it is FLASH. There are 21 I/Os on it, which makes it a very simple device. It has a part number of PIC18F25J10 that can be used to locate similar components. The terminals of this device are set to DUAL. In this case, there are 28 terminationals. It is a member of the PIC? 18J series of electrical components. Using the 3V supply voltage allows for high efficiency. In this gadget, MICROCONTROLLER, RISC is the device's uPs/uCs/Peripheral IC. A total of 28 pins are used in its construction. The method of Surface Mount is used to mount it. It has a total of 28 pins on it. Microcontrollers contains this component. Data and programs may be stored on the devices which have a memory size of 32kB. Working at a frequency of 40MHz results in excellent efficiency. 5V provides an adaptable and voltage-independent supply voltage when it is used by designers. The number of timers and counters is 3. It works with an oscillator type Internal.
PIC18F25J10-I/SS Features
28-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18F25J10-I/SS Applications
There are a lot of Microchip Technology PIC18F25J10-I/SS Microcontroller applications.
- Graphic terminals
- Dryers
- Blood pressure monitors
- Communication-bluetooth, Wi-Fi, radio
- Mice
- Switches
- Xbox
- Smart instruments
- Dialysis machines (performs function of liver)
- Broadband technology, video and voice processing