PIC16F872T-I/SO
| Parameters | |
|---|---|
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 2048 |
| EEPROM Size | 64 x 8 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Height Seated (Max) | 2.64mm |
| Length | 17.87mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 7 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1997 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 1.27mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F872 |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | I2C, SPI, SSP |
| Memory Size | 3.5kB |
| Oscillator Type | External |
| Number of I/O | 22 |
| RAM Size | 128 x 8 |
| Voltage - Supply (Vcc/Vdd) | 4V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 3.5KB 2K x 14 |
| Connectivity | I2C, SPI |
| Supply Current-Max | 15mA |
| Bit Size | 8 |
| Data Converter | A/D 5x10b |
PIC16F872T-I/SO Overview
There is an option to purchase it in the 28-SOIC (0.295, 7.50mm Width) package, which saves space. In this case, it is mounted using the method of Surface Mount. You can find it in the package of Tape & Reel (TR). It is equipped with a PIC core processor. Maintain a temperature of -40°C~85°C TA while working. FLASH has been assigned to it as a program memory. 22 I/Os are present on the device. A component with the same part number as PIC16F872 can be compared to other similar components. At DUAL, it has its terminals. Currently, it consists of 28 terminationals. It is a member of the PIC? 16F series of electrical components. Because the supply voltage is 4.5V, high efficiency can be achieved. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER, RISC. For its construction, 28 pins are used. As a result, it is mounted in accordance with Surface Mount. A total of 28 pins are attached to it. It falls under the category of Microcontrollers. In the device, there is a memory capacity of 3.5kB which may be used to store programs and data. It should be noted that 15mA represents the maximum supply current. Power comes from a source of 5V. This device works well at 20MHz frequency when it is operating at a high rate of efficiency. A designer is able to make full use of the adaptability and supply voltage of 5V by using it. There are currently 3 timers/counters set up on the system. This part is an integral part of the PIC CPU family. The oscillator type External is used to operate the device.
PIC16F872T-I/SO Features
28-SOIC (0.295, 7.50mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F872T-I/SO Applications
There are a lot of Microchip Technology PIC16F872T-I/SO Microcontroller applications.
- Light sensing & controlling devices
- Volt meter
- Washing machines
- Christmas lights
- Fire detection & safety devices
- Microwave ovens
- Electrocardiogram (EKG)
- Kindle
- Measuring revolving objects
- Mobile computers