PIC16F570-I/SS
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2012 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 700mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F570 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | USB |
| Memory Size | 3kB |
| Oscillator Type | Internal |
| Number of I/O | 24 |
| Nominal Supply Current | 170μA |
| RAM Size | 132 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 3KB 2K x 12 |
| Bit Size | 8 |
| Data Converter | A/D 8x8b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | NO |
| Number of Timers/Counters | 1 |
| Address Bus Width | 8b |
| EEPROM Size | 64 x 8 |
| CPU Family | PIC |
| Number of ADC Channels | 8 |
| Height | 1.85mm |
| Length | 10.5mm |
| Width | 5.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F570-I/SS Overview
Due to its space-saving qualities, it is available in the 28-SSOP (0.209, 5.30mm Width) package. The way of Surface Mount is used to mount it. It comes in the package?of a Tube. The device has a PIC core processor. Work should be performed at a temperature of -40°C~85°C TA. The type of memory in which this program is stored is FLASH. 24 I/Os are present on the device. In order to find similar components, it has a base part number of PIC16F570. The terminals are positioned at DUAL. It consists of 28 terminationals. Part of the PIC? 16F series, this electrical component is used in a variety of applications. It is possible to achieve high efficiency with a 5V supply voltage. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER, RISC in order to monitor their performance. A number of 28 pins are used to construct it. Microcontrollers contains this component. A device with a memory size of 3kB can store programs and data. A 2/5.5V source of power is being used to run it. At a frequency of 20MHz, it can achieve excellent efficiency. It appears that there are 1 timers/counters in use. The part is a part of the PIC CPU family. In order to maintain normal operation, Vsup must be above 4.5V. An oscillator type Internal is required for it to work.
PIC16F570-I/SS Features
28-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F570-I/SS Applications
There are a lot of Microchip Technology PIC16F570-I/SS Microcontroller applications.
- Telephone sets
- Paper shredders
- Scanners
- Information appliances (networking of household appliances)
- Teletext terminals
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Playstation
- DCS control intelligent sensor
- Nintendo
- Heater/Fan