PIC16F1823T-I/ST
| Parameters | |
|---|---|
| Factory Lead Time | 11 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | PIC® XLP™ 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 32MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F1823 |
| Pin Count | 14 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5V |
| Supply Voltage-Min (Vsup) | 1.8V |
| Interface | I2C, LIN, SPI, UART, USART |
| Memory Size | 3.5kB |
| Oscillator Type | Internal |
| Number of I/O | 12 |
| RAM Size | 128 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 3.5KB 2K x 14 |
| Connectivity | I2C, LINbus, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| DAC Channels | YES |
| Number of Timers/Counters | 3 |
| ROM (words) | 2048 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F1823T-I/ST Overview
For space savings, it is available in the 14-TSSOP (0.173, 4.40mm Width) package. The way of mounting it is Surface Mount. It is available in the Tape & Reel (TR) package. The device runs in PIC core processor. The temperature should be kept at -40°C~85°C TA while working. Memory type FLASH is used for program memory. There are 12 I/Os on the board. Based on the PIC16F1823 base part number, it can be compared with other components. DUAL is the position of its terminals on the board. A 14 termination is contained within it. PIC? XLP? 16F is the series number of this electrical component. By using a 2.3V voltage supply, high efficiency is possible. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. It is constructed with 14 pins. This device has a total of 14 pins. It is one of the components included in Microcontrollers. It is possible to store programs and data on the devices, as they have a memory size of 3.5kB. There is a source of power of 2/5V that powers this device. This device achieves excellent efficiency at frequencies of 32MHz. 3 counters/timers are currently active. It is a member of the PIC family of CPUs. Normal operation requires a supply voltage (Vsup) that is higher than 1.8V. Using an oscillator type of Internal, it works.
PIC16F1823T-I/ST Features
14-TSSOP (0.173, 4.40mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F1823T-I/ST Applications
There are a lot of Microchip Technology PIC16F1823T-I/ST Microcontroller applications.
- Graphic terminals
- Hearing aids
- Microwave ovens
- Glucose monitoring systems (for Type 1 Diabetes)
- Sonography (Ultrasound imaging)
- Printers
- Food and beverage
- Digital set-top boxes
- Virtual reality VR robots
- DCS control intelligent sensor