PIC12F683-E/P
| Parameters | |
|---|---|
| Factory Lead Time | 5 Weeks |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 4.535924g |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 1997 |
| Series | PIC® 12F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Base Part Number | PIC12F683 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Interface | RS-232, USB |
| Memory Size | 3.5kB |
| Oscillator Type | Internal |
| Number of I/O | 5 |
| Nominal Supply Current | 220μA |
| RAM Size | 128 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 3.5KB 2K x 14 |
| Bit Size | 8 |
| Data Converter | A/D 4x10b |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| Number of Timers/Counters | 3 |
| Address Bus Width | 8b |
| EEPROM Size | 256 x 8 |
| CPU Family | PIC |
| Number of A/D Converters | 1 |
| Number of Programmable I/O | 6 |
| Number of ADC Channels | 4 |
| Height | 4.953mm |
| Length | 10.16mm |
| Width | 7.112mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC12F683-E/P Overview
It is available in the 8-DIP (0.300, 7.62mm) package for the benefit of saving space. Using Through Hole, it is mounted. Tube is the package that contains it. With a processor of PIC cores, the device is powered. When working, the temperature should be kept at -40°C~125°C TA. Memory type FLASH is used for program memory. 5 I/Os have been provided by the device. In order to find similar components, it has a base part number of PIC12F683. This device has terminals at DUAL. A 8 termination is contained within it. PIC? 12F is the series number of this electrical component. As a result of the 5V supply voltage, high efficiency is possible. MICROCONTROLLER, RISC is this gadget's uPs/uC/peripheral IC. The structure is constructed from 8 pins. During the mounting process, the device is mounted based on the Through Hole method. There are 8 pins on it. Microcontrollers contains this component. In the device, there is a memory capacity of 3.5kB which may be used to store programs and data. This device works well at 20MHz frequency when it is operating at a high rate of efficiency. Designers can fully utilize the supply voltage of 5V's adaptability while employing it. There are 3 timers/counters. It belongs to the PIC CPU family. The number 6 represents the number of programmable I/O ports on the board. It works with an oscillator type Internal.
PIC12F683-E/P Features
8-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC12F683-E/P Applications
There are a lot of Microchip Technology PIC12F683-E/P Microcontroller applications.
- Process control devices
- Oscilloscopes
- Industrial instrumentation devices
- Sonography (Ultrasound imaging)
- Traditional industrial transformation
- Leakage current tester
- Teletext terminals
- Hard drives
- Switches
- Wastewater treatment