PIC12F1840T-I/MF
| Parameters | |
|---|---|
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Frequency | 32MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC12F1840 |
| Pin Count | 8 |
| Interface | I2C, LIN, SPI, UART, USART |
| Memory Size | 7kB |
| Oscillator Type | Internal |
| Number of I/O | 5 |
| RAM Size | 256 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.3V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 7KB 4K x 14 |
| Connectivity | I2C, LINbus, SPI, UART/USART |
| Supply Current-Max | 4.1mA |
| Bit Size | 8 |
| Data Converter | A/D 4x10b; D/A 1x5b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 3 |
| ROM (words) | 4096 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 14 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| Format | FIXED-POINT |
| Integrated Cache | NO |
| RAM (words) | 256 |
| Number of Serial I/Os | 1 |
| Number of External Interrupts | 1 |
| On Chip Data RAM Width | 8 |
| Height Seated (Max) | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 8 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | PIC® XLP™ 12F |
| JESD-609 Code | e3 |
PIC12F1840T-I/MF Overview
As a result, it is available in the 8-VDFN Exposed Pad package. Using Surface Mount, it is mounted. It is available in the Tape & Reel (TR) package. A core processor of PIC is present in the device. Work should be done at -40°C~85°C TA. FLASH has been assigned to it as a program memory. There are 5 I/Os on it, which makes it a very simple device. Based on the PIC12F1840 base part number, it can be compared with other components. The position of the device is DUAL at terminal. It has 8 terminationals. This electrical component is part of the PIC? XLP? 12F series. The 3V supply voltage enables high efficiency. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. There are 8 pins used in the construction of this device. It is equipped with 8 pins in total. This component is a part of Microcontrollers. Data and programs can be stored on the devices with a memory size of 7kB. In this case, 4.1mA represents the maximum current supply. It is highly efficient when it works at a frequency of 32MHz. A total of 3 timers/counters have been set up. There is an oscillator type Internal used in this circuit.
PIC12F1840T-I/MF Features
8-VDFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC12F1840T-I/MF Applications
There are a lot of Microchip Technology PIC12F1840T-I/MF Microcontroller applications.
- Data acquisition and control
- Computer/laptop
- Instrument control
- Electrocardiogram (EKG)
- DDC control
- PDAs, game consoles
- Smartphones-calling, video calling, texting, email
- Copiers
- Fax machines
- Broadband technology, video and voice processing