PIC10F202-E/P
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2007 |
| Series | PIC® 10F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 8 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Frequency | 4MHz |
| Base Part Number | PIC10F202 |
| Pin Count | 8 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2.5/5V |
| Supply Voltage-Min (Vsup) | 2V |
| Interface | USB |
| Memory Size | 768B |
| Oscillator Type | Internal |
| Number of I/O | 3 |
| RAM Size | 24 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 768B 512 x 12 |
| Bit Size | 8 |
| Watchdog Timer | Yes |
| Access Time | 4 μs |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | NO |
| DAC Channels | NO |
| Number of Timers/Counters | 1 |
| ROM (words) | 512 |
| On Chip Program ROM Width | 12 |
| CPU Family | PIC |
| Number of Programmable I/O | 4 |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
PIC10F202-E/P Overview
A space-saving advantage is that it is included in the 8-DIP (0.300, 7.62mm) package. This is mounted using the Through Hole method. This item can be found in package Tube. There is a PIC as core processor in this device. When working, it is recommended that the temperature be kept at -40°C~125°C TA. Its type of program memory is FLASH. A total of 3 I/Os are available on this device. A component with the same part number as PIC10F202 can be compared to other similar components. At DUAL, its terminals are located. In this case, there are 8 terminationals. The PIC? 10F series includes this electrical component. High efficiency is possible due to the 5V supply voltage. The gadget has MICROCONTROLLER, RISC as its uPs/uCs/peripheral IC. It is constructed with 8 pins. During the mounting process, the device is mounted based on the Through Hole method. It is equipped with 8 pins in total. It belongs to the subcategory Microcontrollers. It is possible to store programs and data on the devices, as they have a memory size of 768B. Power is provided by a 2.5/5V source. The system is highly efficient when working at a frequency of 4MHz. 1 counters/timers are currently active. The part is a part of the PIC CPU family. There are 4 programmable input/output ports on the chip. Vsup should be kept above 2V for normal operation. Using a Internal oscillator type, it works well.
PIC10F202-E/P Features
8-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC10F202-E/P Applications
There are a lot of Microchip Technology PIC10F202-E/P Microcontroller applications.
- Automatic staplers
- Removable disks
- Radio
- Printers
- Aerospace navigation systems
- Ipad
- Smart highways (navigation, traffic control, information monitoring and car service)
- Virtual reality VR robots
- Wastewater treatment
- Projectors