PI74AVC+16820AAE
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.240, 6.10mm Width) |
| Supplier Device Package | 56-TSSOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74AVC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Voltage - Supply | 1.65V~3.6V |
| Base Part Number | 74AVC16820 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Clock Frequency | 180MHz |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 10 |
| Max Propagation Delay @ V, Max CL | 2.7ns @ 3.3V, 30pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
PI74AVC+16820AAE Overview
The flip flop is packaged in 56-TFSOP (0.240, 6.10mm Width). A package named Tubeincludes it. T flip flop uses Tri-State, Non-Invertedas the output. The trigger it is configured with uses Positive Edge. Surface Mountmounts this electrical part. The supply voltage is set to 1.65V~3.6V. It is operating at -40°C~85°C TA. A flip flop of this type is classified as a D-Type. This type of FPGA is a part of the 74AVC series. There should be no greater frequency than 180MHzon its output. A total of 1elements are contained within it. If you search by 74AVC16820, you will find similar parts. JK flip flop input capacitance is 4pF farads.
PI74AVC+16820AAE Features
Tube package
74AVC series
PI74AVC+16820AAE Applications
There are a lot of Diodes Incorporated PI74AVC+16820AAE Flip Flops applications.
- Dynamic threshold performance
- Frequency Dividers
- Cold spare funcion
- Shift registers
- Storage Registers
- ATE
- Counters
- ESCC
- Bus hold
- High Performance Logic for test systems