PI5A3157BC6EX
| Parameters | |
|---|---|
| Factory Lead Time | 18 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 180mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| JESD-30 Code | R-PDSO-G6 |
| Qualification Status | Not Qualified |
| Polarity | Non-Inverting |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| -3db Bandwidth | 250MHz |
| On-State Resistance (Max) | 13Ohm |
| High Level Output Current | 128mA |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 63 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 2.3pF |
| On-state Resistance Match-Nom | 0.5Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 5.2ns, 3.5ns |
| Charge Injection | 7pC |
| Channel-to-Channel Matching (ΔRon) | 150m Ω |
| Crosstalk | -54dB @ 10MHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Length | 2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PI5A3157BC6EX Overview
The electrical component comes in 6-TSSOP, SC-88, SOT-363 packaging, which makes it convenient to ship overseas. High reliability is provided by advanced packaging method Tape & Reel (TR). This analog switch is mounted in Surface Mount. 2:1 is the ratio of multiplexer to demultiplexer circuits. Operational temperature extended around -40°C~85°C TA. In total, there are 6 terminations. A high-quality output is provided by the electrical component's 1 channels. Powered by a 1.8V voltage supply, the electrical part should be switched on and run. The analog switch ics are built using SPDT switching circuits. A 1 circuit is present in this switch device. Multiplexer or Switches is a typical switch device. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. 1.65V should be the lowest voltage fed to the electronic component. This analogue multiplexer requires a voltage of 1.65V~5.5V when it drains from a single voltage supply.
PI5A3157BC6EX Features
1 Channels
Switch Circuit: SPDT
-3db Bandwidth: 250MHz
PI5A3157BC6EX Applications
There are a lot of Diodes Incorporated PI5A3157BC6EX Analog Switches & Multiplexers ICs applications.
- USB 1.1 signal switching circuits
- Isolation
- Intelligent PBX
- E1 Network Equipment
- PBXs
- Optical Applications
- Battery-powered systems
- E1 Multiplexer
- HDTV
- Audio and video signal routing