PI3C3306UEX
| Parameters | |
|---|---|
| Factory Lead Time | 18 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 8Ohm |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 3306 |
| Number of Elements | 2 |
| Circuit | 1 x 1:1 |
| Supply Voltage-Max (Vsup) | 3.63V |
| Number of Ports | 2 |
| Number of Bits | 1 |
| Throw Configuration | SPST |
| Propagation Delay | 250 ps |
| Quiescent Current | 500μA |
| Turn On Delay Time | 9.8 ns |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Voltage Supply Source | Single Supply |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PI3C3306UEX Overview
It is included in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) in order to save board space.The package is packaged in the manner of Tape & Reel (TR).As far as mounting is concerned, digital switch ic uses Surface Mount.Bus Switch is the analog IC that the multiplexers uses.The operating temperature of -40°C~85°C will not be susceptible to external factors.With a supply voltage of 2.3V~3.6V, designers have greater flexibility of digital controlled switch.The basic configuration of this system includes 8 terminations.The base part number is 3306, which can also be used to find its logic switch related parts.In multiplexer's system, 3.3V is the voltage supplied.At the end of a conductor, it uses GULL WING as the point where the conductor ends.There is a type of supply of Single.Currently, it is configured with a 8 pin configuration.The multiplexer ic is mounted in the direction of Surface Mount.In the signal multiplexer, there are 1 bits available.It is advisable that the maximal supply voltage (Vsup) remains at 3.63V to avoid some unnecessary failures.Part number Bus Driver/Transceivers indicates that the digital switch ic is an electronic part.Without any external influences, it consumes 500μA current of multiplexer ic at all times.A resistance of 2 governs its operation.The resistance of the signal switching is 8Ohm.In the mux switch configuration, there are 2 elements.
PI3C3306UEX Features
Supplied in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
Adopting a supply type of Single
PI3C3306UEX Applications
There are a lot of Diodes Incorporated PI3C3306UEX Signal Switches / Multiplexers / Decoders applications.
- LVDS
- Audio transmission
- Automation system
- Combinational circuit
- Data collection system
- RF-based home automation system
- Microprocessor memory systems
- Medical industry
- A/D converters
- Frequency multiplexing system