PI3C3305UEX
| Parameters | |
|---|---|
| Factory Lead Time | 18 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 8Ohm |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 3305 |
| Operating Supply Voltage | 2.5V |
| Number of Elements | 2 |
| Circuit | 1 x 1:1 |
| Supply Voltage-Max (Vsup) | 3.63V |
| Number of Ports | 2 |
| Number of Bits | 1 |
| Throw Configuration | SPST |
| Propagation Delay | 250 ps |
| Quiescent Current | 500μA |
| Turn On Delay Time | 9.8 ns |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Voltage Supply Source | Single Supply |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PI3C3305UEX Overview
The reason it is provided is that the board space can be saved by placing digital switch in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width).In this case, it is packaged as Tape & Reel (TR).Mounting is performed using Surface Mount.The analog IC used in the multiplexers can be referred to as Bus Switch.The operating temperature of -40°C~85°C will not be susceptible to external factors.Using a 2.3V~3.6V supply voltage provides digital controlled switch's superior flexibility for designers.Among its basic features are 8 terminations.The base part number is 3305, which is also useful when looking up signal switch's related components.The multiplexer's system is powered by 3.3V volts.At the end of a conductor, it uses GULL WING as the point where the conductor ends.There is a type of supply of Single.Currently, it is configured with a 8 pin configuration.It is positioned in the direction of Surface Mount.As a result, signal multiplexer provides 1 bits.To avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.63V.The digital switch ic is an electronic part classified into Bus Driver/Transceivers.Despite not interacting with external factors, it consumes 500μA current of multiplexer ic.It is possible to achieve reliable performance of the multiplexers with a voltage supply of 2.5V.The resistance of the signal switching is 2.A resistance of 8Ohm is used to operate the signal switching.The mux switch configuration consists of 2 elements.
PI3C3305UEX Features
Supplied in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 2.5V
PI3C3305UEX Applications
There are a lot of Diodes Incorporated PI3C3305UEX Signal Switches / Multiplexers / Decoders applications.
- Automatic Monitoring systems
- Time division multiplexing system
- Code conversion
- Microprocessor instruction decoding
- Injectors
- PCIe
- Signal router
- CPU memory location identification
- Arithmetic Logic Units
- Control unit of Central Processing unit (CPU)