PI3C3125LEX
| Parameters | |
|---|---|
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 3125 |
| Qualification Status | Not Qualified |
| Number of Elements | 4 |
| Circuit | 1 x 1:1 |
| Supply Voltage-Max (Vsup) | 3.63V |
| Power Supplies | 2.5/3.3V |
| Supply Voltage-Min (Vsup) | 2.97V |
| Number of Ports | 2 |
| Number of Bits | 1 |
| Throw Configuration | SPST |
| Propagation Delay | 250 ps |
| Quiescent Current | 500μA |
| Turn On Delay Time | 9.8 ns |
| Family | CB3Q/3VH/3C/2B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Voltage Supply Source | Single Supply |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 18 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 8Ohm |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
PI3C3125LEX Overview
Due to the lack of space on the board, digital switch is provided in the 14-TSSOP (0.173, 4.40mm Width).Tape & Reel (TR) is the method used for packaging.digital switch ic uses the method of Surface Mount for mounting.In the multiplexers, the analog IC is indicated by Bus Switch.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.Using a 2.3V~3.6V supply voltage provides digital controlled switch's superior flexibility for designers.The basic configuration of this system includes 14 terminations.There is a base part number of 3125 which can also be used in order to locate the logic switch that are related to this item.For multiplexer's system, 3.3V voltage is supplied.As a result, conductors end at GULL WING.The supply type of this multiplexer ic is Single.A total of 14 pins are configured on this board.Multiplexer ics are mounted in the direction of Surface Mount.There is a family of CB3Q/3VH/3C/2B members.In this signal multiplexer, there are 1 bits provided.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 2.97V.Keeping Vsup at 3.63V will prevent some unnecessary failures.In order for 2.5/3.3V to operate normally, a power supply is provided.Part number Bus Driver/Transceivers indicates that the digital switch ic is an electronic part.In the absence of external influences, it consumes 500μA current of multiplexer ic.This signal switching operates at a resistance of 2.This signal switching operates at a resistance of 8Ohm.In the mux switch configuration, there are 4 elements.
PI3C3125LEX Features
Supplied in the 14-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
PI3C3125LEX Applications
There are a lot of Diodes Incorporated PI3C3125LEX Signal Switches / Multiplexers / Decoders applications.
- Implementing boolean functions with multiple variables
- To select different task for memory in microprocessor memory systems
- Textile mills
- Telephone network
- D/A converters
- Data communication
- Memory system of computers
- Recording transmission
- Idle motor
- Decimal decoder