P82B96P
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Buffer, ReDriver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | I2C |
| Subcategory | Other Interface ICs |
| Technology | BIPOLAR |
| Voltage - Supply | 2V~15V |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | P82B96 |
| Output | 2-Wire Bus |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Number of Channels | 1 |
| Operating Supply Current | 4mA |
| Nominal Supply Current | 900μA |
| Propagation Delay | 5 ns |
| Turn On Delay Time | 270 ns |
| Input | 2-Wire Bus |
| Driver Number of Bits | 2 |
| Low Level Output Current | 3mA |
| Receiver Number of Bits | 2 |
| Interface Standard | GENERAL PURPOSE |
| Data Rate (Max) | 400kHz |
| Supply Voltage1-Nom | 2.5V |
| Capacitance - Input | 4pF |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
P82B96P Overview
This power buffer comes in a convenient 8-DIP (0.300, 7.62mm) package for convenient transportation.Packaged in Tube and ready for power buffer.Through Hole A universal mout for easy adaptation to a wide range of heads.On the topic of types, I would like to point out that this is a typical Buffer, ReDriver.2V~15V voltage is used to power this op amp buffer.It is important that the 1 channels cooperate in order to maintain a high level of output.Input is facilitated by 2-Wire Bus.It is recommended to set the operating temperature to -40°C~85°C to avoid any malfunctions.Application-specific operational amplifier buffers such as this one are targeted at I2C and other markets.You can get more pin-to-pin solutions for your specific needs by searching with "P82B96".On the op amp buffer, you can find 8 terminals.As the splitter is supplied with a 5V voltage, it is able to perform a wide range of demanding tasks.From the power buffer's 8 pins, we can determine its pinout.As far as output is concerned, it is in 2-Wire Bus.In addition, it has 8 pins.The power buffer and other Other Interface ICs play an important role in the industry.Voltage 4mA is needed to operate this power buffer.The repeter uses a 2-Bit receiver.For normal use of the splitter, the nominal supply current should be 900μA.The spliter supports a total of 2 outputs.
P82B96P Features
1 channels.
Mainly used in I2C.
A standard Other Interface ICs.
2-Bit receiver.
2 outputs.
P82B96P Applications
There are a lot of Texas Instruments P82B96P Signal Buffers, Repeaters, Splitters applications.
- Communications Switchers
- Loopback
- Industrial Server
- Test Equipment
- Digital Crossconnects
- Data or Clock Signal Amplification
- Cable Repeaters
- PECL-to-LVDS Translation
- Portable IPC/HMI
- Industrial/Embedded PC