OPA703PA
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | OPA703 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 6V |
| Number of Elements | 1 |
| Operating Supply Current | 160μA |
| Nominal Supply Current | 200μA |
| Output Current | 10mA |
| Slew Rate | 0.6V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 4V~12V ±2V~6V |
| Output Current per Channel | 10mA |
| Input Offset Voltage (Vos) | 750μV |
| Bandwidth | 1MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 1000 kHz |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 93.98dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 160μV |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Nominal Gain Bandwidth Product | 1MHz |
| Max I/O Voltage | 750μV |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA703PA Overview
Packaging for the buffer amplifier is in the form of a 8-DIP (0.300, 7.62mm) case. Buffer amps of this type are called General Purpose-types. In the case of Tube cases, linear amplifier will be delivered. There is a growing number of terminations approaching the number of 8. The pins on this board total to 8 in total. Please take in mind that op amp should be run at 5V. This particular linear amplifier is a type of Operational Amplifier device, to be precise. The buffer op amp includes 8 pins. Op amp rates 750μV as input offset voltage. For this electrical component, Through Hole is the recommended mounting type. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. As long as the supply current of the chip does not exceed 160μA, this op amp ic can operate. 120dB should be the voltage gain. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. There are 1 elements in total in this linear amplifier. The operating supply voltage of instrumentation amplifier is rated 6V voltage.
OPA703PA Features
8 Pins
supply voltage of 5V
120dB voltage gain
Output Type: Rail-to-Rail
OPA703PA Applications
There are a lot of Texas Instruments OPA703PA Instrumentational OP Amps applications.
- Navigation
- Division circuits
- Multiplication circuits
- Logarithmic operation circuits
- High/low-pass filter circuit
- Professional videography
- Power transmission
- Semiconductor detectors
- Strain gauges
- pH (acidity)