OPA2314AID
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | OPA2314 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Channels | 2 |
| Operating Supply Current | 150μA |
| Nominal Supply Current | 150μA |
| Output Current | 20mA |
| Slew Rate | 1.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 75 dB |
| Current - Input Bias | 0.2pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V ±0.9V~2.75V |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 2.5mV |
| Bandwidth | 3MHz |
| Unity Gain BW-Nom | 3000 kHz |
| Voltage Gain | 128dB |
| Average Bias Current-Max (IIB) | 0.0006μA |
| Power Supply Rejection Ratio (PSRR) | 78dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 7V |
| Voltage - Input Offset | 500μV |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.00001μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 3MHz |
| Max I/O Voltage | 2.5mV |
| Input Offset Current-Max (IIO) | 0.00001μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA2314AID Overview
Op amp is packaged in 8-SOIC (0.154, 3.90mm Width) case. General Purpose-type instrumentation amplifiers are used in this application. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are attached to buffer op amp. Please take in mind that this instrumentation amplifier should be run at 5V. It should be noted that this op amp is a type of Operational Amplifier device. Linear amplifier includes 8 pins. As far as the input offset voltage is concerned, linear amplifier rates at 2.5mV. This electronic part is best mounted with type Surface Mount. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. In order for this instrumentation amplifier to operate, the supply current needs to be between 150μA and 10 . Keeping the voltage gain at 128dB is the best course of action. Op amp ic has 2 channels. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages.
OPA2314AID Features
8 Pins
supply voltage of 5V
128dB voltage gain
Output Type: Rail-to-Rail
OPA2314AID Applications
There are a lot of Texas Instruments OPA2314AID Instrumentational OP Amps applications.
- Switching amplifier
- Comparator
- Power control
- Medical instruments
- High/low-pass filter circuit
- ECG equipment
- Non-polarized electrodes
- earphone
- Tablets
- single/dual op amp sum and difference circuits