OMAPL138BZWTD4E
| Parameters | |
|---|---|
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Package / Case | 361-LFBGA |
| Number of Pins | 361 |
| Operating Temperature | -40°C~90°C TJ |
| Packaging | Tube |
| Series | OMAP-L1x |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 361 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Other uPs/uCs/Peripheral ICs |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1V |
| Terminal Pitch | 0.8mm |
| Frequency | 456MHz |
| Base Part Number | OMAPL138 |
| Pin Count | 361 |
| Voltage | 1.35V |
| uPs/uCs/Peripheral ICs Type | DIGITAL SIGNAL PROCESSOR, OTHER |
| Core Processor | ARM926EJ-S |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING POINT |
| Voltage - I/O | 1.8V 3.3V |
| Number of UART Channels | 3 |
| Ethernet | 10/100Mbps (1) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | SDRAM |
| USB | USB 1.1 + PHY (1), USB 2.0 + PHY (1) |
| Additional Interfaces | HPI, I2C, McASP, McBSP, MMC/SD, SPI, UART |
| Co-Processors/DSP | Signal Processing; C674x, System Control; CP15 |
| Barrel Shifter | NO |
| Internal Bus Architecture | MULTIPLE |
| Security Features | Boot Security, Cryptography |
| Display & Interface Controllers | LCD |
| SATA | SATA 3Gbps (1) |
| Height Seated (Max) | 1.4mm |
| Length | 16mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OMAPL138BZWTD4E Overview
The embedded microprocessor has been packed in 361-LFBGA for convenient overseas shipping. High reliability is achieved using advanced packaging method Tube. This CPU has 1 Core 32-Bit cores and 1 Core 32-Bit bus widths. Identify the operating temperature around -40°C~90°C TJ. The OMAP-L1x series contains it. Core-wise, this CPU has a ARM926EJ-S processor. This CPU uses SDRAM RAM controllers. The microprocessor features interfaces HPI, I2C, McASP, McBSP, MMC/SD, SPI, UART for better service. 1.8V 3.3V is the I/O speed of this CPU. The type DIGITAL SIGNAL PROCESSOR, OTHER belongs to uPs/uCs/Peripheral ICs. Using OMAPL138 will help you find variants of the cpu microprocessor. Total terminations are 361. A 1V voltage supply should be used to turn on and run the cpu microprocessor. CPUs operate at 456MHz Hz. 361 pin functions are described in the datasheets. A typical Other uPs/uCs/Peripheral ICs embedded microprocessor. Injection of 361 pins into the body of the embedded microprocessor is carried out. This CPU is widely used in a variety of applications with its Surface Mount mounting. There is 1.35V voltage present in the CPU core. 3 UART (Universal Asynchro3us Receiver/Transmitter) channels are provided by this CPU microprocessor
OMAPL138BZWTD4E Features
ARM926EJ-S Core
OMAPL138BZWTD4E Applications
There are a lot of Texas Instruments OMAPL138BZWTD4E Microprocessor applications.
- Measuring revolving objects
- Smart highways (navigation, traffic control, information monitoring and car service)
- Magnetic resonance imaging (MRI)
- Mice
- Auto-breaking system
- Smartphone
- Air fryers
- Guidance-GPS
- Fax machines
- Electromechanical control