OMAP3503DCUSA
| Parameters | |
|---|---|
| uPs/uCs/Peripheral ICs Type | DIGITAL SIGNAL PROCESSOR, OTHER |
| Core Processor | ARM® Cortex®-A8 |
| Data Bus Width | 32b |
| Core Architecture | ARM |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING POINT |
| Voltage - I/O | 1.8V 3.0V |
| Number of UART Channels | 3 |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | LPDDR |
| USB | USB 1.x (3), USB 2.0 (1) |
| Additional Interfaces | HDQ/1-Wire, I2C, McBSP, McSPI, MMC/SD/SDIO, UART |
| Co-Processors/DSP | Multimedia; NEON™ SIMD |
| Barrel Shifter | NO |
| Internal Bus Architecture | SINGLE |
| Display & Interface Controllers | LCD |
| Height Seated (Max) | 1.4mm |
| Length | 16mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Package / Case | 423-LFBGA, FCBGA |
| Number of Pins | 423 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Series | OMAP-35xx |
| JESD-609 Code | e1 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 423 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Graphics Processors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.8mm |
| Frequency | 600MHz |
| Base Part Number | OMAP3503 |
| Pin Count | 423 |
| Voltage | 1.35V |
| Max Supply Voltage | 1.89V |
| Min Supply Voltage | 1.71V |
| RAM Size | 64kB |
| Memory Type | L2 Cache, ROM, SRAM |
OMAP3503DCUSA Overview
Due to its 423-LFBGA, FCBGA packaging, it is convenient to ship overseas. The packaging method Tray provides high reliability. A CPU with 1 Core 32-Bit cores and width 1 Core 32-Bit busses is used. Identify the operating temperature around -40°C~105°C TJ. A OMAP-35xx series item. The CPU is powered by a ARM? Cortex?-A8 core. The CPU uses LPDDR RAM controllers. With its HDQ/1-Wire, I2C, McBSP, McSPI, MMC/SD/SDIO, UART interfaces, this microprocessor will be able to serve you better. 1.8V 3.0V is the CPU's I/O address. This is a DIGITAL SIGNAL PROCESSOR, OTHER for the uPs/uCs/Peripheral ICs type. Use OMAP3503 when searching for variants of the embedded microprocessor. In total, there are 423 terminations. Using a 1.8V voltage supply, you should be able to operate the cpu microprocessor. At 600MHz, the CPU operates. For information about 423 pins, please refer to the datasheet. An example of a Graphics Processors embedded microprocessor. The size of data Bus of the CPU is based on 32b-bit system. Injecting pins into the embedded microprocessor body results in 423 pins. As a result of its Surface Mount mounting, this CPU is widely used in a wide variety of applications. A 1.35V core voltage is present on the CPU. In general, RAM (Random-Access Memory) is designed with a 64kB of 0MB. normally, the microprocessor should not receive a voltage higher than 1.89V. CPU microprocessors should be fed with 1.71V voltage. A total of 3 UART (Universal Asynchro3us Receiver/Transmitter) channels are available on this embedded microprocessor
OMAP3503DCUSA Features
ARM? Cortex?-A8 Core
32b-Bit Data Bus Width
64kB RAM
OMAP3503DCUSA Applications
There are a lot of Texas Instruments OMAP3503DCUSA Microprocessor applications.
- Hard drives
- Guidance-GPS
- Oil and gas
- Fabric
- Telephone sets
- Copiers
- Petrochemical
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Speed meter
- Refrigerators