NX3L4684GM,132
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 10-XFQFN |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BUTT |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.65V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | NX3L4684 |
| Output | SEPARATE OUTPUT |
| Pin Count | 10 |
| JESD-30 Code | R-PBCC-B10 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 4.3V |
| Power Supplies | 1.5/3.3V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| -3db Bandwidth | 20MHz |
| On-State Resistance (Max) | 750mOhm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 90 dB |
| Current - Leakage (IS(off)) (Max) | 10nA |
| Channel Capacitance (CS(off), CD(off)) | 35pF |
| On-state Resistance Match-Nom | 0.15Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 45ns, 20ns |
| Charge Injection | 50pC |
| Channel-to-Channel Matching (ΔRon) | 40m Ω |
| Crosstalk | -90dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 130ns |
| Switch-off Time-Max | 90ns |
| Voltage - Supply, Single (V+) | 1.4V~4.3V |
| Height Seated (Max) | 0.5mm |
| RoHS Status | ROHS3 Compliant |
NX3L4684GM,132 Overview
Packed in 10-XFQFN, the electronic component is convenient for shipping overseas. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). There is an analog multiplexer mounted in position Surface Mount. Multiplexer and demultiplexer circuits have a number 2:1. Extended operating temperature around -40°C~125°C TA. Totally, there are 10 terminations. This electronic part offers high-quality output due to its 1 channels. Turning on and running the electrical part should be easy with a 1.65V voltage supply. There is an electrical component included in the 10 series. The analog switch ics are built using SPDT switching circuits. There are 2 circuits in this multiplexer. Try searching with NX3L4684 to find analog multiplexer variants. This switch device is a typical Multiplexer or Switches. The voltage required by this switch device is 1.4V~4.3V, draining from a single voltage supply. This analog switch ic utilizes SEPARATE OUTPUT output.
NX3L4684GM,132 Features
1 Channels
Switch Circuit: SPDT
-3db Bandwidth: 20MHz
NX3L4684GM,132 Applications
There are a lot of NXP USA Inc. NX3L4684GM,132 Analog Switches & Multiplexers ICs applications.
- Ultrasound
- Digital access cross connects
- Communications systems
- Relay Replacement
- Communication systems
- SDH
- Digital cross connects (DSX-1)
- Automatic test equipment
- Central office
- Automotive applications