NX3L2G66GT,115
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 8-XFDFN |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.65V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | NX3L2G66G |
| Output | SEPARATE OUTPUT |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-N8 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 4.3V |
| Power Supplies | 1.5/3.3V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| -3db Bandwidth | 60MHz |
| On-State Resistance (Max) | 750mOhm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 90 dB |
| Current - Leakage (IS(off)) (Max) | 10nA |
| Channel Capacitance (CS(off), CD(off)) | 35pF |
| On-state Resistance Match-Nom | 0.04Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 23ns, 8ns |
| Charge Injection | 6pC |
| Channel-to-Channel Matching (ΔRon) | 20m Ω |
| Crosstalk | -90dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 48ns |
| Voltage - Supply, Single (V+) | 1.4V~4.3V |
| Normal Position | NO |
| Height Seated (Max) | 0.5mm |
| Length | 1.95mm |
| RoHS Status | ROHS3 Compliant |
NX3L2G66GT,115 Overview
Packed in 8-XFDFN, the electronic component is convenient for shipping overseas. The advanced packaging method Tape & Reel (TR) provides high reliability. There is an analog multiplexer mounted in position Surface Mount. There is 1:1 ratio between the number of multiplexers and demultiplexers. Temperatures around -40°C~125°C TA are extended for operation. Total terminations are 8. The electronic part provides high-quality output because it has 1 channels. Turning on and running the electrical part should be easy with a 1.65V voltage supply. It is injected into the electrical part body with 8 pins. A SPST - NO switching circuit is used for these analog switches. There are 2 circuits in this multiplexer. NX3L2G66G can be used to search for analog multiplexer variants. The analog multiplexer shown here is a typical Multiplexer or Switches. This analog switch requires a voltage of 1.4V~4.3V to drain from a single voltage supply. SEPARATE OUTPUT outputs are utilized by this digital multiplexer.
NX3L2G66GT,115 Features
1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 60MHz
NX3L2G66GT,115 Applications
There are a lot of NXP USA Inc. NX3L2G66GT,115 Analog Switches & Multiplexers ICs applications.
- PDAs
- SONET/SDH ADM
- HDTV
- Central office
- Battery Powered Systems
- Digital cross connects (DSX-1)
- SDH
- Voice over IP/DSL – Integrated Access Devices, Smart
- Channelized and Unchannelized DS3 applications
- DSUs