NX3DV3899HR,115
| Parameters | |
|---|---|
| Base Part Number | NX3DV3899 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| JESD-30 Code | S-PQCC-N16 |
| Qualification Status | Not Qualified |
| Power Supplies | 1.4/4.3V |
| Number of Circuits | 2 |
| -3db Bandwidth | 200MHz |
| On-State Resistance (Max) | 3.3Ohm |
| Multiplexer/Demultiplexer Circuit | 2:2 |
| Current - Leakage (IS(off)) (Max) | 5nA |
| Channel Capacitance (CS(off), CD(off)) | 8pF |
| Switch Circuit | DPDT |
| Switch Time (Ton, Toff) (Max) | 40ns, 20ns |
| Charge Injection | 4pC |
| Channel-to-Channel Matching (ΔRon) | 700m Ω |
| Crosstalk | -90dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 90ns |
| Voltage - Supply, Single (V+) | 1.4V~4.3V |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 7 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 16-XFQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
NX3DV3899HR,115 Overview
The electrical component comes in 16-XFQFN Exposed Pad packaging, which makes it convenient to ship overseas. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. The multiplexer is located in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 2:2. Operational temperature extended around -40°C~125°C TA. Total terminations are 16. The electronic part body is injected with 16 pins. Based on DPDT switching circuits, these analog multiplexers work. It consists of 2 circuits. Try searching with NX3DV3899 if you're looking for variants. This switch device is a typical Multiplexer or Switches. Draining from a single voltage supply, this analog switch requires a voltage of 1.4V~4.3V. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer.
NX3DV3899HR,115 Features
Switch Circuit: DPDT
-3db Bandwidth: 200MHz
NX3DV3899HR,115 Applications
There are a lot of NXP USA Inc. NX3DV3899HR,115 Analog Switches & Multiplexers ICs applications.
- Video signal routing
- Digital cross connects (DSX-1)
- Isolation
- Modems
- Private Branch Exchange (PBX)
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Channelized and Unchannelized DS3 applications
- Fiber to the Home
- Access Concentrators
- Cross Connects