NUD3160LT1G
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | MicroIntegration™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Resistance | 2.4Ohm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 225mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.95mm |
| Current Rating | 200mA |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NUD3160 |
| Pin Count | 3 |
| Output Voltage | 61V |
| Output Type | N-Channel |
| Max Output Current | 150mA |
| Number of Elements | 1 |
| Interface | On/Off |
| Element Configuration | Single |
| Output Configuration | Low Side |
| Power Dissipation | 225mW |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Propagation Delay | 1.16 μs |
| Switch Type | Relay, Solenoid Driver |
| Halogen Free | Halogen Free |
| Rise Time | 600ns |
| Drain to Source Voltage (Vdss) | 60V |
| Fall Time (Typ) | 622 ns |
| Continuous Drain Current (ID) | 150mA |
| Ratio - Input:Output | 1:1 |
| Gate to Source Voltage (Vgs) | 12V |
| Voltage - Load | 61V Max |
| Driver Number of Bits | 1 |
| Drain to Source Breakdown Voltage | 60V |
| Rds On (Typ) | 1.8 Ω (Max) |
| Max Junction Temperature (Tj) | 150°C |
| Drain to Source Resistance | 1.8Ohm |
| Built-in Protections | TRANSIENT |
| Ambient Temperature Range High | 125°C |
| Height | 1.11mm |
| Length | 3.04mm |
| Width | 1.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NUD3160LT1G Overview
The LED driver's packaged as a Tape & Reel (TR).It is included in the package TO-236-3, SC-59, SOT-23-3.The lighting driver has the mounting type Surface Mount.There is a Relay, Solenoid Driver switch type associated with it.It is recommended that the temperature be set to -40°C~125°C TA for reliable performance.A voltage of Not Required is used to power it.It produces a maximum output voltage of N-Channel volts at its maximum output.It comes under the family of NUD3160.A total of 3 terminations have been recorded.For operation, 3 pins are used.The LED driver has 1 functions.To comply with the operation criteria, the maximum output current is reduced to 150mA.It is positioned in the direction of Surface Mount.A total of 3 pins are present on it.In this LED driving board, there is 2.4Ohm resistance.There is an electrical component included in the MicroIntegration? series.This case results in a 200mA output current.A self-contained LED driver with a capacity of Peripheral Drivers is contained in an econtainer.A total of 1 elements are present.
NUD3160LT1G Features
Resistance of 2.4Ohm
NUD3160LT1G Applications
There are a lot of ON Semiconductor NUD3160LT1G Power Switches ICs applications.
- PC Card Hot Swap
- PDAs
- HDD and SSD
- Low Voltage I/O System Power
- Portable GPS Device
- USB Power Distribution
- Hot Swap
- Solid-State Drives
- Gaming
- Storage (HDDs, SSDs)