NUD3160DMT1
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | SC-74, SOT-457 |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| Series | MicroIntegration™ |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Peripheral Drivers |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Terminal Pitch | 0.95mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | NUD3160 |
| Pin Count | 6 |
| JESD-30 Code | R-PDSO-G6 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 150mA |
| Interface | On/Off |
| Element Configuration | Dual |
| Output Configuration | Low Side |
| Power Dissipation | 380mW |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Switch Type | Relay, Solenoid Driver |
| Rise Time | 600ns |
| Drain to Source Voltage (Vdss) | 60V |
| Fall Time (Typ) | 600 ns |
| Continuous Drain Current (ID) | 150mA |
| Ratio - Input:Output | 1:1 |
| Gate to Source Voltage (Vgs) | 12V |
| Voltage - Load | 61V Max |
| Driver Number of Bits | 2 |
| Drain to Source Breakdown Voltage | 60V |
| Rds On (Typ) | 1.8 Ω (Max) |
| Drain to Source Resistance | 1.8Ohm |
| Built-in Protections | TRANSIENT |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 1.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NUD3160DMT1 Overview
As a result, it is packaged in the form of a Tape & Reel (TR).The SC-74, SOT-457 package contains it.The lighting driver is mounted in the Surface Mount position.Relay, Solenoid Driver is the switch type that it owns.To ensure reliable operation, set the temperature to -40°C~125°C TA.The lighting driver has a total of 2 outputs that are available for use.In order to operate, it requires a voltage supply of Not Required.Voltage output is N-Channel volts at maximum.The NUD3160 family contains this object.The termination count is 6.The LED driver has 2 functions.As a result, the maximum output current is reduced to 150mA in order to meet the operation requirements.It is equipped with a total of 6 pins.There is an electrical component included in the MicroIntegration? series.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.
NUD3160DMT1 Features
NUD3160DMT1 Applications
There are a lot of ON Semiconductor NUD3160DMT1 Power Switches ICs applications.
- Various applications equipped with buttons
- Hot Swap
- Gaming
- Portable GPS Device
- PC Cards
- Smart Phones, Feature Phones
- Wireless/Networking Cards
- Telecom and Network Systems
- Set-Top Boxes
- Storage Drives