NS16C2752TVA/NOPB
| Parameters | |
|---|---|
| Data Rate (Max) | 5Mbps |
| Number of Serial I/Os | 2 |
| Data Transfer Rate-Max | 0.625 MBps |
| Communication Protocol | ASYNC, BIT |
| FIFO's | 64 Byte |
| With Modem Control | Yes |
| Height | 4.57mm |
| Length | 16.59mm |
| Width | 16.59mm |
| Thickness | 4.06mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Number of Pins | 44 |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Serial IO/Communication Controllers |
| Technology | CMOS |
| Voltage - Supply | 2.97V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Base Part Number | 16C2752 |
| Pin Count | 44 |
| Operating Supply Voltage | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2, DUART |
| Nominal Supply Current | 3mA |
| Max Supply Current | 3mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 24MHz |
| Boundary Scan | NO |
| Low Power Mode | YES |
NS16C2752TVA/NOPB Overview
In the 44-LCC (J-Lead) package, you can get the product at a low cost.Transmission is carried out over 2, DUART channels.As far as packaging is concerned, Tube is used.Its uPs/uCs/Peripheral ICs use SERIAL IO/COMMUNICATION CONTROLLER, SERIAL.A configuration of 44 terminations is used.During operation, it receives a voltage of 3.3V.The status of this electronic part is currently Active.A total of 2 serial I/Os are used to communicate data.UART can be mounted through a way of Surface Mount.In order for it to operate, a voltage of 2.97V~5.5V must be applied.There are 44 pins on this electronic device.A frequency of 24MHz is measured for this IC.UART is included under the subcategory of Serial IO/Communication Controllers as a result of a series of similarUARTies between UART and other similar entUARTies.UART is important to keep the operating temperature below -40°C to ensure a long working period.It is important to keep the operating temperature below 85°C to ensure a long working period.As its configuration basis, the 44 pins are used.Using Surface Mount, it is mounted.Its high-efficiency operation relies on a voltage of 5V.There is a default setting for the base part number of the part to be 16C2752.The supply current of 3mA is an allowable maximum value.
NS16C2752TVA/NOPB Features
2 serial I/Os
Clock frequency of 24MHz
Operating supply voltage of 5V
NS16C2752TVA/NOPB Applications
There are a lot of Texas Instruments NS16C2752TVA/NOPB UARTs applications.
- Ethernet Network Routers
- Wireless Portable Point-of-Sale Terminals
- Cellular data devices
- Portable and battery operated devices
- Communications equipment
- Multi serial ports RS-232/RS-422/RS-485 Cards
- Infrared Transceivers
- Handheld Terminal
- Factory Automation and Process Controls
- Domestic Applications