NLVAS4599DTT1G
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Resistance | 30Ohm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 200mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NLVAS4599 |
| Pin Count | 6 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 1μA |
| Turn On Delay Time | 9 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 3 ns |
| -3db Bandwidth | 220MHz |
| On-State Resistance (Max) | 25Ohm |
| High Level Output Current | 50mA |
| Low Level Output Current | 50mA |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 93 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF 10pF |
| On-state Resistance Match-Nom | 3Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 14ns, 8ns |
| Charge Injection | 3pC |
| Channel-to-Channel Matching (ΔRon) | 2 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 30ns |
| Voltage - Supply, Single (V+) | 2V~5.5V |
| Normal Position | NC |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NLVAS4599DTT1G Overview
Shipping overseas is convenient due to the electrical component's packing in SOT-23-6 Thin, TSOT-23-6. This packaging method provides high reliability because it uses advanced packaging techniques. In Surface Mount, this analog switch is mounted. 2:1 is the ratio between multiplexers and demultiplexers. Operating temperature extended to -55°C~125°C TA. Totally, there are 6 terminations. A electrical component with 1 channels is capable of high-quality output. A 4.5V voltage supply should turn on and run the electronic component. A total of 6 pins are injected into the body of the electronic part. A SPDT switching circuit is used for these analog switches. A 1 circuit is present in this switch device. Try searching for NLVAS4599 variants of the analog switch ic. An switch multiplexer with 30Ohm internal resistance has a value of 30Ohm. To find out what the 6 pins do, please refer to the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. Multiplexers should not be powered above 5.5V in normal situations. A analog switch ic that has a cost-effective Single supply type. 2V should be the lowest voltage fed to the electronic component. This digital switch can be operated with a current of 1μA. A voltage of 2V~5.5V is required for this switch device, which drains from a single voltage source. 5V operating voltages can be used with this electrical part. The Automotive, AEC-Q100 series is responsible for it.
NLVAS4599DTT1G Features
1 Channels
Switch Circuit: SPDT
1μA Supply Current
-3db Bandwidth: 220MHz
NLVAS4599DTT1G Applications
There are a lot of ON Semiconductor NLVAS4599DTT1G Analog Switches & Multiplexers ICs applications.
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- CSU
- Transmit
- High reliability control systems
- Residential Gateways, Home Gateway/Router
- Avionics and Military Systems
- Precision instrumentation
- Microprocessor controlled systems
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Switching Systems