NLV74HC4052ADR2G
| Parameters | |
|---|---|
| Factory Lead Time | 51 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MC74HC4052A |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 2V~6V ±2V~6V |
| Halogen Free | Halogen Free |
| Supply Current-Max (Isup) | 0.08mA |
| Neg Supply Voltage-Nom (Vsup) | -4.5V |
| -3db Bandwidth | 95MHz |
| On-State Resistance (Max) | 100Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 40 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 80pF |
| On-state Resistance Match-Nom | 12Ohm |
| Switch Circuit | SP4T |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Crosstalk | -60dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 345ns |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NLV74HC4052ADR2G Overview
The electronic component is convenient to ship overseas because it is packed in a 16-SOIC (0.154, 3.90mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. In Surface Mount, you'll find this switch device. Multiplexers and demultiplexers have a number of circuits 4:1. The operating temperature is extended to around -55°C~125°C TA. In total, 16 terminations have occurred. The electronic part provides high-quality output because it has 4 channels. With a 3V voltage supply, the electrical component should be turned on and run. A total of 16 pins are injected into the body of the electronic part. On the other hand, analog switches can be constructed using SP4T switching circuits. A total of 2 circuits make up this switch device. MC74HC4052A can be used to search for analog multiplexer variants. Datasheets for 16 pin functions are available upon request. Theswitch device is a typical Multiplexer or Switches. There is an integrated analog IC DIFFERENTIAL MULTIPLEXER in the module. This is electronic component of the Automotive, AEC-Q100 series.
NLV74HC4052ADR2G Features
4 Channels
Switch Circuit: SP4T
-3db Bandwidth: 95MHz
NLV74HC4052ADR2G Applications
There are a lot of ON Semiconductor NLV74HC4052ADR2G Analog Switches & Multiplexers ICs applications.
- SDH
- Digital Cross-Connects
- Modems
- Remote wireless modules
- Video switching
- Low-Voltage
- Sample-and-hold systems
- Relay replacements
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Cell phones