NLV14013BDR2G
| Parameters | |
|---|---|
| Factory Lead Time | 51 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 4000B |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Base Part Number | 4013 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 2 |
| Supply Voltage-Min (Vsup) | 3V |
| Load Capacitance | 50pF |
| Clock Frequency | 14MHz |
| Turn On Delay Time | 50 ns |
| Logic Function | AND, D-Type |
| Current - Quiescent (Iq) | 4μA |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 8.8mA 8.8mA |
| Output Polarity | COMPLEMENTARY |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 100ns @ 15V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Clock Edge Trigger Type | Positive Edge |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NLV14013BDR2G Overview
The package is in the form of 14-SOIC (0.154, 3.90mm Width). Package Tape & Reel (TR)embeds it. In the configuration, Differentialis used as the output. This trigger uses the value Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. It operates with a supply voltage of 3V~18V. In the operating environment, the temperature is -55°C~125°C TA. There is D-Type type of electronic flip flop associated with this device. In this case, it is a type of FPGA belonging to the 4000B series. Its output frequency should not exceed 14MHz Hz. D latch consists of 2 elements. During its operation, it consumes 4μA quiescent energy. Terminations are 14. The 4013 family contains it. The D flip flop is powered by a voltage of 5V . JK flip flop input capacitance is 5pF farads. There is an electronic component mounted in the way of Surface Mount. This board is designed with 14pins on it. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. It is part of the FF/Latchesbase part number family. For normal operation, the supply voltage (Vsup) should be above 3V. Due to its reliability, this T flip flop is well suited for TAPE AND REEL.
NLV14013BDR2G Features
Tape & Reel (TR) package
4000B series
14 pins
NLV14013BDR2G Applications
There are a lot of ON Semiconductor NLV14013BDR2G Flip Flops applications.
- Data storage
- Differential Individual
- Divide a clock signal by 2 or 4
- Test & Measurement
- Load Control
- Memory
- Buffered Clock
- Registers
- Common Clocks
- ESCC