NLSF1174MNR2
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Type | D-Type |
| Terminal Finish | TIN LEAD |
| Voltage - Supply | 2V~6V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Function | Reset |
| Qualification Status | COMMERCIAL |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Clock Frequency | 35MHz |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 6 |
| Max Propagation Delay @ V, Max CL | 19ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | Non-RoHS Compliant |
NLSF1174MNR2 Overview
The flip flop is packaged in a case of 16-VFQFN Exposed Pad. D flip flop is included in the Tape & Reel (TR)package. As configured, the output uses Non-Inverted. JK flip flop uses Positive Edgeas the trigger. In this case, the electronic component is mounted in the way of Surface Mount. A voltage of 2V~6Vis required for its operation. In this case, the operating temperature is -55°C~125°C TA. A flip flop of this type is classified as a D-Type. You should not exceed 35MHzin its output frequency. In total, it contains 1 elements. As a result, it consumes 4μA of quiescent current without being affected by external factors. A total of 16 terminations have been made. A voltage of 4.5V provides power to the D latch. This JK flip flop has a 10pFfarad input capacitance. As soon as Vsup reaches 6V, the maximum supply voltage is reached. A normal operating voltage (Vsup) should remain above 2V.
NLSF1174MNR2 Features
Tape & Reel (TR) package
NLSF1174MNR2 Applications
There are a lot of Rochester Electronics, LLC NLSF1174MNR2 Flip Flops applications.
- 2 – Bit synchronous counter
- Parallel data storage
- Computers
- Frequency division
- Convert a momentary switch to a toggle switch
- Frequency Divider circuits
- Matched Rise and Fall
- Set-reset capability
- Reduced system switching noise
- Test & Measurement