NLAS6234MUTBG
| Parameters | |
|---|---|
| Lifecycle Status | OBSOLETE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-UFQFN |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| Resistance | 500mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | NLAS6234 |
| Output | SEPARATE OUTPUT |
| Pin Count | 10 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3V |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Max Supply Voltage | 4.5V |
| Min Supply Voltage | 2.7V |
| Turn On Delay Time | 11 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 9 ns |
| -3db Bandwidth | 36MHz |
| On-State Resistance (Max) | 550mOhm |
| Multiplexer/Demultiplexer Circuit | 2:2 |
| Off-state Isolation-Nom | 70 dB |
| Current - Leakage (IS(off)) (Max) | 1μA |
| Channel Capacitance (CS(off), CD(off)) | 45pF |
| On-state Resistance Match-Nom | 0.15Ohm |
| Switch Circuit | DPDT |
| Switch Time (Ton, Toff) (Max) | 17ns, 9ns |
| Channel-to-Channel Matching (ΔRon) | 190m Ω |
| Crosstalk | -98dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 2.7V~4.5V |
| Height Seated (Max) | 0.6mm |
| Length | 1.8mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NLAS6234MUTBG Overview
The electronic component is convenient to ship overseas because it is packed in a 10-UFQFN. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. There is an analog multiplexer mounted in position Surface Mount. In the multiplexer and demultiplexer, 2:2 represents the number of circuits. Around -40°C~85°C TA is the extended operating temperature. A total of 10 terminations have been recorded. The electronic part delivers high-quality output through its 2 channels. It is safe to turn on and run the electronic component with a 3.3V voltage supply. This electrical component is included in the 10 series of products. These analog multiplexers are built based on DPDT switching circuits. The multiplexer consists of 2 circuits. Using the NLAS6234 search parameter, you can discover variants of the switch. An switch multiplexer with 500mOhm internal resistance has a value of 500mOhm. For details about the functions of 10 pins, please refer to the datasheets. Multiplexer or Switches is a typical switch device. It is normally recommended that users do not supply the multiplexer with voltages higher than 4.5V. A cost-effective Single supply type analogue multiplexer. In order for the electronic part to function properly, the lowest voltage should be 2.7V. Draining from a single voltage supply, this analog switch requires a voltage of 2.7V~4.5V. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them. This electrical part is compatible with 3V operating voltages.
NLAS6234MUTBG Features
2 Channels
Switch Circuit: DPDT
-3db Bandwidth: 36MHz
NLAS6234MUTBG Applications
There are a lot of ON Semiconductor NLAS6234MUTBG Analog Switches & Multiplexers ICs applications.
- SONET
- PDH Multiplexers
- Battery-powered systems
- ATM
- SDH
- E1 Network Equipment
- Remote wireless modules
- High-Voltage
- High reliability control systems
- Imaging