NLAS4684MNR2G
| Parameters | |
|---|---|
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 23 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| Resistance | 800mOhm |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NLAS4684 |
| Pin Count | 10 |
| Number of Outputs | 4 |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Operating Supply Current | 200nA |
| Nominal Supply Current | 180nA |
| Turn On Delay Time | 50 ns |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Turn-Off Delay Time | 60 ns |
| -3db Bandwidth | 9.5MHz |
| On-State Resistance (Max) | 800mOhm |
| High Level Output Current | 300mA |
| Low Level Output Current | 300mA |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 65 dB |
| Current - Leakage (IS(off)) (Max) | 1μA |
| Channel Capacitance (CS(off), CD(off)) | 102pF 104pF |
| On-state Resistance Match-Nom | 0.06Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 30ns, 30ns |
| Charge Injection | 15pC |
| Channel-to-Channel Matching (ΔRon) | 60m Ω |
| Crosstalk | -83dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 1.8V~5.5V |
| Height | 950μm |
| Length | 3mm |
NLAS4684MNR2G Overview
The electrical component comes in 10-VFDFN Exposed Pad packaging, which makes it convenient to ship overseas. The advanced packaging method Tape & Reel (TR) provides high reliability. A switch device like this is mounted in Surface Mount. 2:1 is the ratio between multiplexers and demultiplexers. An extended operating temperature of -55°C~125°C TA degrees Celsius. The total number of terminations is 10. High-quality output is provided by the electronic component's 2 channels. When the electronic component is given a voltage of 3V, it should be turned on and run. As part of its design, the 10 series is equipped with this electronic component. Multiplexers built on a SPDT switching circuit are built. Search with NLAS4684 if you are looking for analog multiplexer variants. An switch multiplexer with 800mOhm internal resistance has a value of 800mOhm. For details about the functions of 10 pins, please refer to the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. Users should never supply a voltage higher than 5.5V to a switch device. An effective Single supply digital multiplexer. A low voltage of 1.8V should be applied to the electronic component. It would be sufficient to run this analogue multiplexer with 200nA current. Draining from a single voltage supply, this analog switch requires a voltage of 1.8V~5.5V. Operating voltages of 5V are compatible with the electrical part. There are 4 outputs on the analogue multiplexer.
NLAS4684MNR2G Features
2 Channels
Switch Circuit: SPDT
200nA Supply Current
-3db Bandwidth: 9.5MHz
NLAS4684MNR2G Applications
There are a lot of ON Semiconductor NLAS4684MNR2G Analog Switches & Multiplexers ICs applications.
- PBXs
- Medical
- Battery Powered Systems
- Precision test equipment
- Optical Applications
- USB 1.1 signal switching circuits
- PDAs
- Intelligent PBX
- Audio and video routing
- DVD-R