NLAS4599DFT2G
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 30Ohm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 200mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NLAS4599 |
| Pin Count | 6 |
| Number of Outputs | 2 |
| Polarity | Non-Inverting |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 1μA |
| Nominal Supply Current | 1μA |
| Power Dissipation | 200mW |
| Turn On Delay Time | 28 ns |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Turn-Off Delay Time | 12 ns |
| -3db Bandwidth | 220MHz |
| On-State Resistance (Max) | 25Ohm |
| High Level Output Current | 50mA |
| Low Level Output Current | 50mA |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 93 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF 10pF |
| On-state Resistance Match-Nom | 3Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 14ns, 8ns |
| Charge Injection | 3pC |
| Channel-to-Channel Matching (ΔRon) | 2 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 30ns |
| Voltage - Supply, Single (V+) | 2V~5.5V |
| Height | 1mm |
| Length | 2.2mm |
| Width | 1.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NLAS4599DFT2G Overview
Shipping overseas is convenient due to the electrical component's packing in 6-TSSOP, SC-88, SOT-363. High reliability is ensured by the advanced packaging method Tape & Reel (TR). It is mounted in the position Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. Operational temperature extended around -55°C~125°C TA. A total of 6 terminations have been recorded. The electronic part provides high-quality output because it has 1 channels. When the electronic component is given a voltage of 4.5V, it should be turned on and run. 6 pins are injected to the electronic part body. A SPDT switching circuit is used for these analog switches. If you are looking for variants of the digital switch, trying search with NLAS4599. Internally, this switch multiplexer has a resistance of 30Ohm. Datasheets for functions of 6 pins are available. This switch device is a typical Multiplexer or Switches. Users shouldn't supply more than 5.5V voltage to the switch device. A cost-effective Single supply type analogue multiplexer. In order for the electronic part to function properly, the lowest voltage should be 2V. The analogue multiplexer could operate on 1μA current. A voltage of 2V~5.5V is required for this switch device, which drains from a single voltage source. The transfer of data can be performed over 200MHz bandwidths. There are 2 outputs on the analogue multiplexer.
NLAS4599DFT2G Features
1 Channels
Switch Circuit: SPDT
1μA Supply Current
-3db Bandwidth: 220MHz
Bandwidth: 200MHz
NLAS4599DFT2G Applications
There are a lot of ON Semiconductor NLAS4599DFT2G Analog Switches & Multiplexers ICs applications.
- ISDN NT1/TA
- SDH
- E1 Network Equipment
- Digital access cross connects
- Switching Systems
- DSLAMs
- High-Voltage
- PBX interfaces
- PDH Multiplexers
- Avionics test equipment