NLAS2066UST3G
| Parameters | |
|---|---|
| Factory Lead Time | 19 Weeks |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFSOP (0.091, 2.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Resistance | 7Ohm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 250mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NLAS2066 |
| Output | SEPARATE OUTPUT |
| Pin Count | 8 |
| Operating Supply Voltage | 3V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 1μA |
| Power Dissipation | 250mW |
| Max Supply Current | 1μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 9 ns |
| Number of Inputs | 2 |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Turn-Off Delay Time | 10 ns |
| -3db Bandwidth | 186MHz |
| On-State Resistance (Max) | 7Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 73 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF 10pF |
| On-state Resistance Match-Nom | 1.3Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 3ns, 6ns |
| Charge Injection | 7.4pC |
| Channel-to-Channel Matching (ΔRon) | 2 Ω |
| Switching | MAKE-BEFORE-BREAK |
| Switch-off Time-Max | 11ns |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Normal Position | NO |
| Height Seated (Max) | 0.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NLAS2066UST3G Overview
Due to its 8-VFSOP (0.091, 2.30mm Width) packaging, the electronic part is convenient for international shipping. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have a number of circuits 1:1. Operating temperature around -55°C~125°C TA extended. The total number of terminations is 8. A high-quality output is provided by the electrical component's 1 channels. When a voltage supply of 2.3V is used, the electronic component should be turned on and run. An injection of 8 pins is performed into the body of the electrical component. A SPST - NO switching circuit is used for these analog switches. Use NLAS2066 to search for variants of the digital switches. Internally, this switch multiplexer has a resistance of 7Ohm. To find out what the 8 pins do, please refer to the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. Users should never supply a voltage higher than 5.5V to a switch device. A analog switch ic that has a cost-effective Single supply type. The lowest voltage the electronic part should receive is 1.65V. The analogue multiplexer could operate on 1μA current. Analogue multiplexers require a 1.65V~5.5V voltage to drain from a single voltage supply. A digital multiplexer may suffer damage if voltage is applied above 1μA. This analog switch ic utilizes SEPARATE OUTPUT output. 3V operating voltages can be used with this electrical part. A 2 input needs to be operated.
NLAS2066UST3G Features
1 Channels
Switch Circuit: SPST - NO
1μA Supply Current
-3db Bandwidth: 186MHz
NLAS2066UST3G Applications
There are a lot of ON Semiconductor NLAS2066UST3G Analog Switches & Multiplexers ICs applications.
- SONET
- Frame Relay Equipment
- FTTH
- Cable Modem
- Industrial control systems
- Precision instrumentation
- Audio and video routing
- PDAs
- New designs requiring multiplexer functions
- PCMCIA cards