NID9N05ACLT4G
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-3, DPak (2 Leads + Tab), SC-63 |
| Surface Mount | YES |
| Number of Pins | 3 |
| Transistor Element Material | SILICON |
| Operating Temperature | -55°C~175°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | Automotive, AEC-Q101 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Additional Feature | LOGIC LEVEL COMPATIBLE |
| Subcategory | FET General Purpose Power |
| Max Power Dissipation | 1.74W |
| Terminal Form | GULL WING |
| Pin Count | 3 |
| JESD-30 Code | R-PSSO-G2 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Number of Elements | 1 |
| Interface | On/Off |
| Element Configuration | Single |
| Output Configuration | Low Side |
| Operating Mode | ENHANCEMENT MODE |
| Power Dissipation | 1.74W |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Case Connection | DRAIN |
| Input Type | Non-Inverting |
| Turn On Delay Time | 200 ns |
| Switch Type | Relay, Solenoid Driver |
| Transistor Application | SWITCHING |
| Halogen Free | Halogen Free |
| Drain to Source Voltage (Vdss) | 55V |
| Turn-Off Delay Time | 2.5 μs |
| Continuous Drain Current (ID) | 9A |
| Threshold Voltage | 1.75V |
| Ratio - Input:Output | 1:1 |
| Gate to Source Voltage (Vgs) | 15V |
| Voltage - Load | 52V Max |
| Drain Current-Max (Abs) (ID) | 9A |
| Fault Protection | Over Voltage |
| Drain to Source Breakdown Voltage | 59V |
| Input Capacitance | 250pF |
| FET Technology | METAL-OXIDE SEMICONDUCTOR |
| Rds On (Typ) | 90m Ω |
| Drain to Source Resistance | 90mOhm |
| Rds On Max | 90 mΩ |
| Nominal Vgs | 1.75 V |
| Height | 2.38mm |
| Length | 6.22mm |
| Width | 6.73mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NID9N05ACLT4G Overview
A Tape & Reel (TR) is used to package it.The TO-252-3, DPak (2 Leads + Tab), SC-63 package includes it.The mounting type of the LED driver is Surface Mount.A Relay, Solenoid Driver switch type is owned by it.To ensure reliable performance, the temperature should be set to -55°C~175°C TJ.There is a default setting of 1 for output.The LED driving board operates with a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.It contains 2 terminations.The operation is performed through the 3 pins.3 pins are equipped with it.This electrical component can be found in the Automotive, AEC-Q101 series.A self-contained LED driver with a capacity of FET General Purpose Power is contained in an econtainer.This LED driver can also produce LOGIC LEVEL COMPATIBLE.Total, there are 1 elements.To name a few, the lighting driver has SWITCHING transistor application.
NID9N05ACLT4G Features
Additional features like LOGIC LEVEL COMPATIBLE
Transistor applications such as SWITCHING
NID9N05ACLT4G Applications
There are a lot of ON Semiconductor NID9N05ACLT4G Power Switches ICs applications.
- USB Protection
- USB Power Distribution
- HDD, SSD
- Wireless Headsets
- Smart Phones, Feature Phones
- PDAs
- Notebook PC
- Wireless/Networking Cards
- Set-top-box
- Various applications equipped with buttons