NE5534AP
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | NE5534 |
| Pin Count | 8 |
| Operating Supply Voltage | 15V |
| Number of Channels | 1 |
| Operating Supply Current | 4mA |
| Nominal Supply Current | 4mA |
| Output Current | 38mA |
| Slew Rate | 13V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 500nA |
| Voltage - Supply, Single/Dual (±) | 10V~30V ±5V~15V |
| Output Current per Channel | 38mA |
| Input Offset Voltage (Vos) | 4mV |
| Bandwidth | 10MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 10000 kHz |
| Voltage Gain | 100dB |
| Low-Offset | NO |
| Frequency Compensation | YES AVCL>=3 |
| Supply Voltage Limit-Max | 22V |
| Voltage - Input Offset | 500μV |
| Low-Bias | NO |
| Micropower | NO |
| Programmable Power | NO |
| Dual Supply Voltage | 9V |
| Nominal Gain Bandwidth Product | 10MHz |
| Max I/O Voltage | 4mV |
| Power | YES |
| Input Offset Current-Max (IIO) | 0.3μA |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NE5534AP Overview
Packaging for the buffer amplifier is in the form of a 8-DIP (0.300, 7.62mm) case. There are two types of operational amplifiers in this circuit. The case in which buffer amplifier is delivered is called a Tube case. The number of terminations approaches 8. In this case, there are 8 pins on the board. It is important to remember that this op amp should be operated at a voltage of 15V volts. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. Linear amplifier includes 8 pins. In terms of input offset voltage, operational amplifier rates 4mV. This electronic part is recommended for mounting type Through Hole. With regard to operating temperature, op amp ranges 0°C~70°C. Using a supply current of 4mA , this buffer op amp will be able to operate. Keeping the voltage gain at 100dB is the best course of action. Instrumentation amplifier has 1 channels on it. The operating supply voltage of instrumentation amplifier is rated 15V voltage.
NE5534AP Features
8 Pins
supply voltage of 15V
100dB voltage gain
NE5534AP Applications
There are a lot of Texas Instruments NE5534AP Instrumentational OP Amps applications.
- Laptop
- Mobile phone
- Computer workstations
- Division circuits
- Television broadcasting equipment
- Measurements of Wheatstone bridge
- Radiation thermometry transducers
- Differentiator circuits
- Industrial control system
- High input resistance broadband