NE5532ADE4
| Parameters | |
|---|---|
| Package / Case | SOIC |
| Surface Mount | YES |
| Number of Pins | 8 |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Pin Count | 8 |
| Operating Supply Voltage | 15V |
| Number of Elements | 2 |
| Power Supplies | +-5/+-15/10/30V |
| Temperature Grade | COMMERCIAL |
| Operating Supply Current | 8mA |
| Nominal Supply Current | 16mA |
| Current - Output | 38mA |
| Slew Rate | 9 V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 800nA |
| Output Current per Channel | 38mA |
| Input Offset Voltage (Vos) | 4mV |
| Bandwidth | 10MHz |
| Gain Bandwidth Product | 10MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 10000 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 1μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Max Dual Supply Voltage | 15V |
| Min Dual Supply Voltage | 5V |
| Nominal Gain Bandwidth Product | 10MHz |
| Max I/O Voltage | 4mV |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NE5532ADE4 Overview
The linear amplifier is packaged in a SOIC case which makes it easy for the consumer to handle. This is a OPERATIONAL AMPLIFIER type op amp. There is a Rail/Tube case that is delivered with the instrumentation amplifiers. There is a growing number of terminations approaching the number of 8. Buffer amplifier has a total of 8 pins on it. Please take in mind that this instrumentation amplifier should be run at 15V. To be specific, this instrumentation amplifier is a type of Operational Amplifier. In total, the buffer amplifier consists of 8 pins. In terms of the input offset voltage, instrumentation amplifier rates at 4mV. You can run this op amp ic on 8mA . Op amp is a member of the 100dB's 100dB family. The temperature should not be lower than 0°C for operational amplifier ics to operate. You should only use op amp buffer at temperatures that are no higher than 70°C. There are 2 elements in total in this linear amplifier. The operating supply voltage of instrumentation amplifier is rated 15V voltage. There should be a dual supply voltage of 15V for you to conduct this electrical part.
NE5532ADE4 Features
8 Pins
supply voltage of 15V
100dB voltage gain
NE5532ADE4 Applications
There are a lot of Texas Instruments NE5532ADE4 Instrumentational OP Amps applications.
- Signal amplification
- Video conversion and routing
- Large motor controllers
- Inverse/same-phase proportional circuit
- single/dual op amp sum and difference circuits
- High-frequency data acquisition systems
- High gain DC amplifier
- Medical instruments
- pH (acidity)
- Fission chambers