NCV8461DR2G
| Parameters | |
|---|---|
| Factory Lead Time | 15 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 1.5W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13.5V |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 34V |
| Supply Voltage-Min (Vsup) | 5V |
| Interface | On/Off |
| Current - Output (Max) | 2A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 1.7mA |
| Input Type | CMOS |
| Turn On Delay Time | 140 ps |
| Switch Type | General Purpose |
| Logic Function | AND |
| Halogen Free | Halogen Free |
| Turn-Off Delay Time | 170 ps |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5V~34V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 2A |
| Rds On (Typ) | 350m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Length | 5mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCV8461DR2G Driver Description
The NCV8461 is a High-Side drive that is completely protected and may be used to switch a variety of loads, including bulbs, solenoids, and other activators. By having an active current limit and a thermal shutdown, the device is internally guarded against an overload state. A diagnostic output reports thermal shutdown and OFF state open load conditions.
NCV8461DR2G Driver Features
ESD Protection
Off State Open Load Detection
CMOS (3 V/5 V) Compatible Control Input
Thermal Shutdown with Automatic Restart
Reverse Battery Protection (with external resistor)
Overvoltage Protection
Very Low Standby Current
Short Circuit Protection
AEC-Q100 Qualified
Undervoltage Shutdown
Loss of Ground and Loss of VD Protection
NCV8461DR2G Driver Applications
Resistive, Inductive, and Capacitive Loads Switching
Replacement of Electromechanical Relays and Discrete Circuits
Lighting
Fans
Wipers
Fuel Pumps