NCV8408DTRKG
| Parameters | |
|---|---|
| Factory Lead Time | 31 Weeks |
| Lifecycle Status | ACTIVE, NOT REC (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-3, DPak (2 Leads + Tab), SC-63 |
| Surface Mount | YES |
| Number of Pins | 3 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Terminal Pitch | 2.29mm |
| Reach Compliance Code | not_compliant |
| Pin Count | 3 |
| JESD-30 Code | R-PSSO-G2 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Interface | On/Off |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Turn On Delay Time | 10 μs |
| Switch Type | General Purpose |
| Halogen Free | Halogen Free |
| Rise Time | 20μs |
| Turn-Off Delay Time | 30 μs |
| Ratio - Input:Output | 1:1 |
| Gate to Source Voltage (Vgs) | 14V |
| Voltage - Load | 42V Max |
| Driver Number of Bits | 1 |
| Fault Protection | Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 13A |
| Rds On (Typ) | 55m Ω |
| Turn Off Time | 60 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Output Current Flow Direction | SINK |
| Length | 6.54mm |
| Width | 6.095mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCV8408DTRKG Overview
The LED driver's packaged as a Tape & Reel (TR).Package TO-252-3, DPak (2 Leads + Tab), SC-63 contains it.The lighting driver is mounted in the Surface Mount position.It owns the General Purpose switch type.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.As a default, the output is set to 1.To operate, it needs a supply voltage of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.It consists of 2 terminations in total.The 3 pins are used for the operation of the system.It consists of 1 functions.As a result, it has a total of 3 pins.Electrical components such as this are included in the Automotive, AEC-Q100 series.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.
NCV8408DTRKG Features
NCV8408DTRKG Applications
There are a lot of ON Semiconductor NCV8408DTRKG Power Switches ICs applications.
- Solid State Drivers
- PC Card Hot Swap
- Notebook and Tablet Computers
- Handheld Devices
- Smartphone and PDA
- Smart Phones, Feature Phones
- USB3.1 Power Delivery
- USB Ports/Hubs
- Portable GPS
- Hot Swap