NCV8401DTRKG
| Parameters | |
|---|---|
| Lifecycle Status | CONSULT SALES OFFICE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-3, DPak (2 Leads + Tab), SC-63 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Cut Tape (CT) |
| Published | 2008 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Resistance | 23mOhm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | NCV8401 |
| Pin Count | 3 |
| JESD-30 Code | R-PSSO-G2 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 30A |
| Number of Elements | 1 |
| Interface | On/Off |
| Element Configuration | Single |
| Output Configuration | Low Side |
| Power Dissipation | 64W |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 35A |
| Continuous Drain Current (ID) | 33A |
| Ratio - Input:Output | 1:1 |
| Gate to Source Voltage (Vgs) | 14V |
| Voltage - Load | 42V Max |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 42V |
| Rds On (Typ) | 23m Ω |
| Drain to Source Resistance | 29mOhm |
| Output Current Flow Direction | SINK |
| Height | 2.2606mm |
| Length | 6.7056mm |
| Width | 6.223mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NCV8401DTRKG Overview
As you can see, it's packaged in the way of a Cut Tape (CT).The TO-252-3, DPak (2 Leads + Tab), SC-63 package contains it.A Surface Mount mounting is used for the LED driving board.General Purpose is the switch type it owns.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.In this LED driver, there are no outputs available.Operation is based on a supply voltage of Not Required.Voltage output is N-Channel volts at maximum.I believe it belongs to the NCV8401 family.It contains 2 terminations.In order to operate, 3 pins are used.This operation requires the maximum output current to be decreased to 30A.Surface Mount is mounted in the way of this lighting driver.This LED driver is equipped with a total of 3 pins.In this LED driving board, there is 23mOhm resistance.It is part of the Automotive, AEC-Q100 series.A self-contained LED driver with a capacity of Peripheral Drivers is contained in an econtainer.A total of 1 elements are present in this list.
NCV8401DTRKG Features
Resistance of 23mOhm
NCV8401DTRKG Applications
There are a lot of ON Semiconductor NCV8401DTRKG Power Switches ICs applications.
- USB Ports/Hubs
- Hard Disk Drives
- Storage (HDDs, SSDs)
- Wireless Modem Data Cards
- Portable Devices
- Portable Video Game Players
- USB Protection
- Hot Swaps
- Notebook PC
- Wireless/Networking Cards