NCV7703D2G
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Applications | DC Motors, General Purpose |
| Additional Feature | ALSO REQUIRES DRIVER SUPPLY 5.5 TO 40 VOLTS |
| Subcategory | Motion Control Electronics |
| Technology | Power MOSFET |
| Voltage - Supply | 3V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | NCV7703 |
| Pin Count | 14 |
| Number of Outputs | 3 |
| Max Output Current | 1A |
| Supply Voltage-Max (Vsup) | 5.25V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | SPI |
| Analog IC - Other Type | BRUSH DC MOTOR CONTROLLER |
| Nominal Supply Current | 3mA |
| Output Configuration | Half Bridge (3) |
| Max Supply Current | 3mA |
| Output Current per Channel | 500mA |
| Rise Time | 25ns |
| Fall Time (Typ) | 25 ns |
| Voltage - Load | 5.5V~40V |
| Fault Protection | Current Limiting, ESD, Over Temperature, Over Voltage, UVLO |
| Number of Drivers | 6 |
| Rds On (Typ) | 800m Ω LS, 800m Ω HS |
| Load Type | Inductive |
| Height Seated (Max) | 1.75mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
NCV7703D2G Overview
H bridge is packaged using Tube.As a cost-saving measure, H bridge is included in the 14-SOIC (0.154, 3.90mm Width) package.Based on the supply voltage of 3V~5.25V, improved reliabilbridge drivery can be ensured.H bridge circuit is mounted on Surface Mount.The operating temperature of -40°C~150°C TJ enables motor driver H bridge to work normally.H bridge motor driver can be used for a variety of purposes, including DC Motors, General Purpose.PCB mounting is performed using Surface Mount.Transmission lines are terminated with H bridges whose characteristic impedance matches their characteristic impedance, known as 14 terminations.As H bridge ic of a signal interface, 14 pins are used as pronged contacts.Based on its base H bridge ic number of NCV7703, further related H bridge ics can be identified.The H bridge is powered by a voltage supply of 5V.The analog IC type of this H bridge is BRUSH DC MOTOR CONTROLLER.At a specified ambient temperature, 1A is the maximum load current that a power supply can provide.The 14 pins work together to provide this bridge driver with the functionality it requires.It has a 3 output.As part of the Motion Control Electronics subcategory, this H bridge motor driver has various similarities to other parts in this category.In the system, 6 drivers are integrated.Additionally, H-bridge is capable of providing ALSO REQUIRES DRIVER SUPPLY 5.5 TO 40 VOLTS.
NCV7703D2G Features
Available in 14-SOIC (0.154, 3.90mm Width) Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : NCV7703
With ALSO REQUIRES DRIVER SUPPLY 5.5 TO 40 VOLTS Drivers
NCV7703D2G Applications
There are a lot of ON Semiconductor NCV7703D2G Full Bridge Drivers, Half-Bridge Drivers applications.
- Optical disc drives
- High-Current DC-DC Point-of-Load Converters
- Desktop Computers
- VTR
- DVD players
- V-Core
- Bipolar stepper motor
- Voltage Regulators for DDR memory arrays
- Voltage Regulators
- OA equipments