NCV3020BDR2G
| Parameters | |
|---|---|
| Factory Lead Time | 9 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Base Part Number | NCV3020 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 600mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 13mA |
| Nominal Supply Current | 13mA |
| Output Configuration | Positive |
| Output Current | 10A |
| Voltage - Supply (Vcc/Vdd) | 4.7V~28V |
| Max Supply Current | 13mA |
| Input Voltage (Min) | 4.7V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 600kHz |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 670kHz |
| Max Duty Cycle | 80 % |
| Clock Sync | No |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCV3020BDR2G Overview
In the 8-SOIC (0.154, 3.90mm Width) package, the switching controller meets most application requirements. dc motor controller is suitable for 1 output generation. Packaged in solid enclosures, this pmic has a Tape & Reel (TR) rating. Transistor Driver dc switching's outputs (s) can be handled by it. 4.7V~28V is the supply voltage and the operating voltage of the dc control. Suitable for work in a -40°C~125°C TJ dc switcher. With this switching controller, you can switch at 600kHz. A generalization of dc dc regulator can be made using Surface Mount. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. The switching converters's terminal (s) are designed at DUAL . Different dc switching's functions can be applied to 8 terminations. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's input voltageis 12V volts. Searching "NCV3020" will return other relevant dc to dc converter ics. The switching converter has a total of 8 pins. Switching converter type is specifically Switching Regulator or Controllers. It is recommended that the input voltage of the dc dc voltage regulator be 4.7V. The test statistics indicate that DC regulator outputs a voltage of 600mV. A starting point for a project is to note down the dc dc regulator's usual output current, which is 10A. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 80 %. This Surface Mount makes DC switcher suitable for most prototypes and applications. This dc regulatorhas a max frequency of 670kHz. The dc to dc voltage regulator belongs to the Automotive, AEC-Q100 series. The supply current is 13mA. A current greater than 13mA may result in improper operation and possibly damage to the component. This the controllers dc has a nominal current supply of 13mA.
NCV3020BDR2G Features
Transistor Driver Outputs
Switching Frequency: 600kHz
PULSE WIDTH MODULATION
Max Duty Cycle: 80 %
NCV3020BDR2G Applications
There are a lot of ON Semiconductor NCV3020BDR2G DC to DC converter applications.
- Overvoltage protection circuits in TV sets
- Production lines
- Plate bending machines
- Computed tomography (CT)
- Lathes
- Correction machines
- Digital precision reference circuits
- Gear/thread machining machines
- Photovoltaic power
- Electric water heaters