NCP1377P
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Surface Mount | NO |
| Number of Pins | 7 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 300kHz |
| Base Part Number | NCP1377 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 18V |
| Input Voltage-Nom | 11V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 7.5V~18V |
| Input Voltage (Min) | 8.2V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 100kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 40ns |
| Fall Time (Typ) | 20 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting, Over Temperature, Over Voltage |
| Output Isolation | Isolated |
| Voltage - Start Up | 12.5V |
| Height Seated (Max) | 4.45mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NCP1377P Overview
A ac to dc converter of the package 8-DIP (0.300, 7.62mm), 7 Leads contains the ac to dc converter.There is a AC/DC power converter of Tube available.There is a mounting point for this AC/DC converter in the way of Through Hole .For the ac dc converter to perform properly, it should be operated at a temperature of -40°C~125°C TJ °C.A SWITCHING CONTROLLER analog integrated circuit is used in this AC DC converter.The switching frequency reaches Up to 100kHz .It can be used within the range of 7.5V~18V supply voltage (Vcc/Vdd).There are a total of 7 terminations.Approximately 7 pins are present on the ac/dc converter.The ac-dc converter has 8 pins.The NCP1377 family can be used to search for similar acdc converters.There are 1 outputs to be processed.AC to DC converter is contained in Switching Regulator or Controllers .Current output is set to 500mA .The voltage output by this AC/DC converter is 18V .AC to DC converter reaches high efficiency when operated at a frequency of 300kHz .
NCP1377P Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at Up to 100kHz
With 7 pins
Output Current at 500mA
NCP1377P Applications
There are a lot of ON Semiconductor NCP1377P AC DC Converters applications.
- Standby power supplies for VCR
- Cleaners
- AC/DC Adaptors/Chargers for Cordless Phone
- Vacuum Cleaner
- Standby power supplies for TV
- AC/DC LED Driver applications
- Adaptors for DSCs
- Appliances
- LED Driver
- Standby and Auxiliary Power Supplies