NCP1230P133G
| Parameters | |
|---|---|
| Factory Lead Time | 18 Weeks |
| Lifecycle Status | ACTIVE, NOT REC (Last Updated: 1 week ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 7 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Additional Feature | PULSE FREQUENCY MODULATION TECHNIQUE IS ALSO POSSIBLE |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 133kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1230 |
| Pin Count | 7 |
| Number of Outputs | 1 |
| Output Voltage | 18V |
| Input Voltage-Nom | 13V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 800mA |
| Voltage - Supply (Vcc/Vdd) | 7.7V~18V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 40ns |
| Fall Time (Typ) | 15 ns |
| Nominal Input Voltage | 18V |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 80 % |
| Duty Cycle | 80% |
| Output Isolation | Isolated |
| Voltage - Start Up | 12.6V |
| Height Seated (Max) | 4.45mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1230P133G Overview
This ac to dc converter is included in the package 8-DIP (0.300, 7.62mm), 7 Leads .The AC/DC power converter type is Tube .Through Hole is mounted in the way of this AC/DC converter.Ideally, the ac dc converter should be operated at a temperature of -40°C~125°C TJ degrees Celsius.SWITCHING CONTROLLER analog ICs are employed in this AC DC converter.A range of 7.7V~18V supply voltages (Vcc/Vdd) can be used.As a result, it has had 7 terminations.In this ac/dc converter, there are 7 pins.The ac-dc converter has 7 pins.It are possible to mount thare ac dc converters by Through Hole .The NCP1230 family allows you to search for similar acdc converters.The number of outputs to run is 1 .The ac to dc conversions are contained in Switching Regulator or Controllers .Currently, the output current is set to 800mA .The output voltage of the AC/DC converter is 18V .This power AC DC is capable of reaching high efficiency when operating at a frequency of 133kHz .It is also possible to discover PULSE FREQUENCY MODULATION TECHNIQUE IS ALSO POSSIBLE when using this ACDC converter.
NCP1230P133G Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
With 7 pins
Output Current at 800mA
NCP1230P133G Applications
There are a lot of ON Semiconductor NCP1230P133G AC DC Converters applications.
- Power tools fast chargers with trickle and on/off
- Set -Top Box (STB) Power Supply
- Remotely-controlled appliances
- MPS parts
- 3.3V power supplies
- Air conditioners
- Battery Chargers
- AC?DC USB chargers for Cell Phones
- AC-DC Output Power Conversion Applications
- Adapter/Charger for Cordless Phones