NCP1230P133
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Surface Mount | NO |
| Number of Pins | 7 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | PULSE FREQUENCY MODULATION TECHNIQUE IS ALSO POSSIBLE |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | NCP1230 |
| Pin Count | 7 |
| Number of Outputs | 1 |
| Output Voltage | 18V |
| Operating Supply Voltage | 18V |
| Input Voltage-Nom | 13V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 800mA |
| Voltage - Supply (Vcc/Vdd) | 7.7V~18V |
| Input Voltage (Min) | 8.4V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 133kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 40ns |
| Fall Time (Typ) | 15 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 80 % |
| Output Isolation | Isolated |
| Voltage - Start Up | 12.6V |
| Height Seated (Max) | 4.45mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NCP1230P133 Overview
In the 8-DIP (0.300, 7.62mm), 7 Leads package, the ac to dc converter is embedded.You can get it in AC/DC power converter Tube .This AC/DC converter is mounted in the way of Through Hole .For the ac dc converter to perform properly, it should be operated at a temperature of -40°C~125°C TJ °C.The AC DC converter utilizes a type SWITCHING CONTROLLER analog IC.When the switching frequency reaches 133kHz , the process is complete.The voltage range of the supply can be set to 7.7V~18V (Vcc/Vdd).Total terminations are 7 .On this ac/dc converter, there are 7 pins.In this ac-dc converter, there are 7 pins.A similar acdc converter can be searched by using the NCP1230 family.AC to DC converter is necessary to run 1 outputs.The ac to dc conversions are contained in Switching Regulator or Controllers .There is 800mA output current set.This AC/DC converter produces a voltage of 18V as its output.Using this ACDC converter, PULSE FREQUENCY MODULATION TECHNIQUE IS ALSO POSSIBLE is also accessible.When the supply voltage is 18V , the interface IC conducts.
NCP1230P133 Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 133kHz
With 7 pins
Output Current at 800mA
Operating Supply Voltage at the range of 18V
NCP1230P133 Applications
There are a lot of ON Semiconductor NCP1230P133 AC DC Converters applications.
- Auxiliary Power Supply
- Standby power
- Automotive Telematics
- Wireless System
- Power tools fast chargers with trickle and on/off
- Cleaners
- Adaptors for DSCs
- LED Driver
- AC?DC USB chargers for Cell Phones
- Power Adaptors