NCP1216P100G
| Parameters | |
|---|---|
| Factory Lead Time | 2 Weeks |
| Lifecycle Status | LIFETIME (Last Updated: 1 day ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 7 |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 100kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1216 |
| Pin Count | 7 |
| Number of Outputs | 1 |
| Output Voltage | 10V |
| Input Voltage-Nom | 11V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 10V~16V |
| Max Supply Current | 5mA |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 60ns |
| Fall Time (Typ) | 20 ns |
| Nominal Input Voltage | 11V |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Over Load, Over Temperature, Short Circuit |
| Max Duty Cycle | 81 % |
| Duty Cycle | 75% |
| Output Isolation | Isolated |
| Height | 3.44mm |
| Length | 10.16mm |
| Width | 6.6mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1216P100G Overview
There is a ac to dc converter embedded in package 8-DIP (0.300, 7.62mm), 7 Leads .The AC/DC power converter is available in Tube .In this case, the AC/DC converter is mounted in the way of Through Hole .To deliver its performance, the ac dc converter should be operated at a temperature of 0°C~150°C TJ .The AC DC converter utilizes a type SWITCHING CONTROLLER analog IC.As long as the supply voltage (Vcc/Vdd) is within the range of 10V~16V , the AC/DC converter may be used.As a result, it has had 7 terminations.It contains 7 pins.There are 7 pins on the ac-dc converter.There are no problem mounting the ac dc converters by Through Hole .It is possible to search for similar acdc converters by using the NCP1216 family.A total of 1 outputs need to be run.The following ac to dc conversions are contained in Switching Regulator or Controllers .The output current is set to 500mA .This AC/DC converter produces a voltage of 10V as its output.High efficiency can be achieved when AC to DC converters frequency is set to 100kHz .It is possible to read the REACH SVHC standard at: No SVHC .Approximately 5mA amps of supply current can be handled by the power AC DC.
NCP1216P100G Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
With 7 pins
Output Current at 500mA
NCP1216P100G Applications
There are a lot of ON Semiconductor NCP1216P100G AC DC Converters applications.
- Records
- Laptops and personal digital assistants
- Set-top boxes
- Appliances
- Battery chargers for cordless
- AC?DC USB chargers for Tablets
- AC--DC Adapter
- Power adapters for network devices
- Air Conditioning
- Automotive Telematics