NCP1201D60R2G
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1201 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 6.5V |
| Input Voltage-Nom | 11V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 250mA |
| Voltage - Supply (Vcc/Vdd) | 16V Max |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 60kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 116ns |
| Fall Time (Typ) | 41 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Over Load, Over Temperature, Short Circuit |
| Max Duty Cycle | 83 % |
| Output Isolation | Isolated |
| Voltage - Breakdown | 500V |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NCP1201D60R2G Overview
In the package 8-SOIC (0.154, 3.90mm Width) , the ac to dc converter is embedded.In Tape & Reel (TR) case, the ac dc converter is available.In this case, the AC/DC converter is mounted in the way of Surface Mount .Ideally, the ac dc converter should be operated at a temperature of -40°C~150°C TJ degrees Celsius.The AC DC converter uses a type SWITCHING CONTROLLER analog integrated circuit.At this point, the switching frequency reaches 60kHz .The AC/DC converter is capable of being used when the supply voltage is 16V Max (Vcc/Vdd).In total, it has 8 terminations.The ac/dc converter has 8 pins.There are 8 pins on the ac-dc converter.Surface Mount is a suitable mounting point for the ac dc converters.If you select the NCP1201 family, you will be able to search for similar acdc converters.There are 1 outputs to be run.The ac to dc conversions can be found in Switching Regulator or Controllers .250mA is set as the output current.Its output voltage amounts to 6.5V .
NCP1201D60R2G Features
Packaged with 8-SOIC (0.154, 3.90mm Width)
Switching Frequency at 60kHz
With 8 pins
Output Current at 250mA
NCP1201D60R2G Applications
There are a lot of ON Semiconductor NCP1201D60R2G AC DC Converters applications.
- Power adapters for monitors
- Dimmers
- AC--DC Adapter
- Replaces linear transformers
- Appliance Power Supplies
- Set -Top Box (STB) Power Supply
- RCC SMPS
- MP3
- Small off-line low voltage power supplies
- Wall switches