NCP1080DEG
| Parameters | |
|---|---|
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Controller (PD), DC/DC |
| Terminal Finish | Tin (Sn) |
| Voltage - Supply | 0V~57V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | NCP1080 |
| Pin Count | 20 |
| Max Output Current | 26mA |
| Number of Channels | 1 |
| Power - Max | 13W |
| Max Output Voltage | 9.6V |
| Topology | Flyback |
| Min Input Voltage | 0V |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 57V |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Fall Time (Typ) | 50 ns |
| Min Output Voltage | 8.4V |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Both |
| Standards | 802.3af (PoE) |
| Switching Frequency | 500kHz |
| Duty Cycle | 80 % |
| Auxiliary Sense | No |
| Height | 950μm |
| Length | 6.6mm |
| Width | 4.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 14 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
NCP1080DEG Overview
PoE controller is part of the Tube package, which is included in the download.Packaged in the manner of 20-TSSOP (0.173, 4.40mm Width) Exposed Pad.In this application, it is an PoE controller that is of the Controller (PD), DC/DC type.Channels are growing strong/weak depending on the category: 1.In order to ensure its reliability, PoE operates at the operating temperature of -40°C~85°C.The supply voltage of this electrical Po E controller is 0V~57V.A part number's Po E controllers of NCP1080 can be determined by its base number.A 20 termination corresponds to the practice of terminating a transmission line with an impedance-matching power over ethernet controller.Power can be reached by this electrical ethernet over power controller at a maximum of 13W Watts.As you can see from the image, it is equipped with 20 pin count.20 pins are used in the design of this board.This power over ethernet PoE controller can accept voltages as high as 57V as input voltage.The minimal input voltage of this power over the ethernet controller is 0V.
NCP1080DEG Features
Tube package
20 pin count
20 pins
NCP1080DEG Applications
There are a lot of ON Semiconductor NCP1080DEG Power Over Ethernet (PoE) Controllers applications.
- POS Terminals
- Industrial Automation Equipment
- PoE powered device appliances
- RFID Readers
- Power over Ethernet
- Higher Power Ethernet Powered Devices
- Pico-base Stations
- Lighting
- Security Cameras
- IP Phone Power Management