NCP1053P44G
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Surface Mount | NO |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Terminal Finish | MATTE TIN |
| Power (Watts) | 40W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T8 |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Voltage - Supply (Vcc/Vdd) | 7.5V~10V |
| Input Voltage (Min) | 7.5V |
| Topology | Flyback |
| Output Current-Max | 2A |
| Frequency - Switching | 44kHz |
| Input Voltage (Max) | 8.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Load, Over Temperature |
| Duty Cycle | 77% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Voltage - Start Up | 8.5V |
| Height Seated (Max) | 4.45mm |
| Length | 9.78mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
NCP1053P44G Overview
The ac to dc converter is embedded in 8-DIP (0.300, 7.62mm), 7 Leads package.There is a AC/DC power converter of Tube available.Through Hole mounts this AC/DC converter.To deliver its performance, the ac dc converter should be operated at a temperature of -40°C~150°C TJ .The AC DC converter utilizes a type SWITCHING REGULATOR analog IC.When the switching frequency reaches 44kHz , the process is complete.It can be used within the range of 7.5V~10V supply voltage (Vcc/Vdd).Total terminations are 8 .There are 8 pins on the ac-dc converter.Using a unique technique, it is possible to ensure an input voltage with a maximum value of 8.5V .It is possible to supply the ac to dc inverter with a maximum current of 2A .
NCP1053P44G Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 44kHz
NCP1053P44G Applications
There are a lot of Rochester Electronics, LLC NCP1053P44G AC DC Converters applications.
- Air Conditioning
- IoT Applications
- Adaptors for DSCs
- Home appliances
- AC?DC USB chargers for Tablets
- Automotive Clusters
- Chargers for cell/cordless phones
- ZigBee
- AC/DC LED Driver applications
- Automotive Infotainment