NCP1051ST100T3
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Surface Mount | YES |
| Number of Pins | 4 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Power (Watts) | 40W |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 40W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Terminal Pitch | 2.3mm |
| Reach Compliance Code | not_compliant |
| Frequency | 100kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | NCP1051 |
| Pin Count | 4 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Voltage - Supply (Vcc/Vdd) | 7.5V~10V |
| Input Voltage (Min) | 7.5V |
| Topology | Flyback |
| Control Mode | VOLTAGE-MODE |
| Output Current-Max | 2A |
| Input Voltage (Max) | 8.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Load, Over Temperature |
| Duty Cycle | 77% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Voltage - Start Up | 8.5V |
| Length | 6.5mm |
| Width | 3.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NCP1051ST100T3 Overview
TO-261-4, TO-261AA is the package in which the ac to dc converter is embedded.There is a AC/DC power converter of Tape & Reel (TR) available.This AC/DC converter is mounted in the way of Surface Mount .It is necessary to operate the ac dc converter at a temperature of -40°C~150°C TJ °C in order for it to perform properly.A SWITCHING REGULATOR analog integrated circuit is used in this AC DC converter.As long as the supply voltage (Vcc/Vdd) is within the range of 7.5V~10V , the AC/DC converter may be used.A total of 4 terminations have been recorded.The ac/dc converter has a total of 4 pins.In this ac-dc converter, there are 4 pins.Search similar acdc converters based on NCP1051 family members.A total of 1 outputs are available for processing.There are a ac to dc conversions included in Switching Regulator or Controllers .AC to DC converter is able to reach high efficiency when its frequency is 100kHz .Using a unique technique, a voltage with a maximum value of 8.5V can be ensured.Currently, the maximum current that the ac to dc inverter can take is 2A .
NCP1051ST100T3 Features
Packaged with TO-261-4, TO-261AA
With 4 pins
NCP1051ST100T3 Applications
There are a lot of ON Semiconductor NCP1051ST100T3 AC DC Converters applications.
- Z-Wave
- ZigBee
- Low power ac?dc Adapters for Chargers
- Portable audio
- Laptops and personal digital assistants
- Standby and Auxiliary Power Supplies
- PDAs
- Automotive Telematics
- RCC SMPS
- Open Frame Switching Power Supply