NCP1051P100
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Power (Watts) | 40W |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 40W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Frequency | 100kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | NCP1051 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Voltage - Supply (Vcc/Vdd) | 7.5V~10V |
| Quiescent Current | 450μA |
| Input Voltage (Min) | 7.5V |
| Topology | Flyback |
| Control Mode | VOLTAGE-MODE |
| Output Current-Max | 2A |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Load, Over Temperature |
| Duty Cycle | 77% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Voltage - Start Up | 8.5V |
| Height Seated (Max) | 4.45mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NCP1051P100 Overview
In the package 8-DIP (0.300, 7.62mm), 7 Leads , the ac to dc converter is embedded.It is available in Tube AC/DC power converter.The AC/DC converter is mounted in the way of Through Hole .It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ °C in order to achieve its full performance.The AC DC converter uses a type SWITCHING REGULATOR analog integrated circuit.The AC/DC converter is capable of being used when the supply voltage is 7.5V~10V (Vcc/Vdd).There have been 8 terminations of this program.It contains 8 pins.There are 8 pins on the ac-dc converter.Based on the NCP1051 family, you can search for similar acdc converters.A total of 1 outputs are available for processing.Switching Regulator or Controllers contains the ac to dc conversions.A high efficiency can be achieved by operating at a frequency of 100kHz .It is possible to supply the ac to dc inverter with a maximum current of 2A .In the state of 450μA , AC to DC converter consumes quiescent current.
NCP1051P100 Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
With 8 pins
NCP1051P100 Applications
There are a lot of ON Semiconductor NCP1051P100 AC DC Converters applications.
- Small off-line low voltage power supplies
- Adapters for Handheld Electronics
- AC/DC Adaptors/Chargers for E-books
- Dimmers
- PDAs
- Adapters
- Cellular phone chargers
- Set-top boxes
- AC/DC LED Driver applications
- Industrial controls